Hi,

the Sync interface is connected directly without a Switch.
But Carp is running WAN/LAB for example.


-- 
Grüsse
 
Daniel

Am 07.06.17, 16:04 schrieb "List im Auftrag von Espen Johansen" 
<[email protected] im Auftrag von [email protected]>:

    I assume you did a pfsync (HA) interface on each firewall? If so did you
    connect this directly without going thru the switch? A direct connection is
    prefered for the sync interface. Also make sure that if you do direct
    connection then use a 6ft cable first to connect them. Some interfaces have
    issues if the cable is too short.
    
    Ivo Tonev: When you bild redundant firewalls you also want redundant
    switches. This is the normal approach.
    
    
    On Wed, Jun 7, 2017, 15:52 Ivo Tonev <[email protected]> wrote:
    
    > Can tou send network diagram? Why 2 switches? How they are connected?
    >
    > There are any feature like Cisco's arp inspection?
    >
    > Em 7 de jun de 2017 10:45, "Daniel" <[email protected]> escreveu:
    >
    > > Both are Physical.
    > >
    > > --
    > > Grüsse
    > >
    > > Daniel
    > >
    > > Am 07.06.17, 14:34 schrieb "List im Auftrag von Ivo Tonev" <
    > > [email protected] im Auftrag von [email protected]>:
    > >
    > >     Firewalls are virtual or physical servers?
    > >
    > >     On Wed, Jun 7, 2017 at 9:12 AM, Daniel <[email protected]> wrote:
    > >
    > >     > Hi,
    > >     >
    > >     > Firewall on the Switch is the latest installed.
    > >     > The Switch is just simple installed. No VLANS actually just IGMP
    > > disabled.
    > >     > Carp has for sure 3 IPs. 2 Dedicated for each Server and one CARP
    > > (Virtual
    > >     > Failover per Subnet)
    > >     >
    > >     >
    > >     > --
    > >     > Grüsse
    > >     >
    > >     > Daniel
    > >     >
    > >     > Am 06.06.17, 00:04 schrieb "List im Auftrag von Ugo Bellavance" <
    > >     > [email protected] im Auftrag von [email protected]>:
    > >     >
    > >     >     On 2017-06-02 08:13 AM, Daniel wrote:
    > >     >     > Hi there,
    > >     >     >
    > >     >     > i run 2 pfsense Firewalls. I tried to use CARP but it will
    > > turn over
    > >     > every 1-2-3 hours.
    > >     >     > Sometimes it is so fast the pf1 is master and pf2 has the
    > > routes. In
    > >     > this case I need to reboot the both Servers.
    > >     >     >
    > >     >     > After I tried a lot id ont find any solutions. I took a
    > > different
    > >     > brand (Sophos UTM) and here is the same behave.
    > >     >     > So I think this could be a network problem.
    > >     >     >
    > >     >     > Is there any important thinks which must be enabled or
    > > disabled in
    > >     > the Switch?
    > >     >     > Or need the Switch some special configurations?
    > >     >     >
    > >     >     > When I use Linux with Bondig it also switch the NICs very
    > > often.
    > >     >     >
    > >     >     > We use 2 Switches from Netgear JGS524Ev2
    > >     >     >
    > >     >     > Mayme someone has some experience with it?
    > >     >
    > >     >     Can you give us more information? You do have 3 IP addresses
    > per
    > >     >     interface? How is your switch configured? Any tagged vLANs
    > > involved? Is
    > >     >     the switch's firmware up to date?
    > >     >
    > >     >     _______________________________________________
    > >     >     pfSense mailing list
    > >     >     https://lists.pfsense.org/mailman/listinfo/list
    > >     >     Support the project with Gold! https://pfsense.org/gold
    > >     >
    > >     >
    > >     > _______________________________________________
    > >     > pfSense mailing list
    > >     > https://lists.pfsense.org/mailman/listinfo/list
    > >     > Support the project with Gold! https://pfsense.org/gold
    > >
    > >
    > >
    > >
    > >     --
    > >     Ivo R. Tonev
    > >     +55 61 98409-2642
    > >     [email protected]
    > >     _______________________________________________
    > >     pfSense mailing list
    > >     https://lists.pfsense.org/mailman/listinfo/list
    > >     Support the project with Gold! https://pfsense.org/gold
    > >
    > > _______________________________________________
    > > pfSense mailing list
    > > https://lists.pfsense.org/mailman/listinfo/list
    > > Support the project with Gold! https://pfsense.org/gold
    > _______________________________________________
    > pfSense mailing list
    > https://lists.pfsense.org/mailman/listinfo/list
    > Support the project with Gold! https://pfsense.org/gold
    _______________________________________________
    pfSense mailing list
    https://lists.pfsense.org/mailman/listinfo/list
    Support the project with Gold! https://pfsense.org/gold

_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold

Reply via email to