Can tou send network diagram? Why 2 switches? How they are connected?

There are any feature like Cisco's arp inspection?

Em 7 de jun de 2017 10:45, "Daniel" <[email protected]> escreveu:

> Both are Physical.
>
> --
> Grüsse
>
> Daniel
>
> Am 07.06.17, 14:34 schrieb "List im Auftrag von Ivo Tonev" <
> [email protected] im Auftrag von [email protected]>:
>
>     Firewalls are virtual or physical servers?
>
>     On Wed, Jun 7, 2017 at 9:12 AM, Daniel <[email protected]> wrote:
>
>     > Hi,
>     >
>     > Firewall on the Switch is the latest installed.
>     > The Switch is just simple installed. No VLANS actually just IGMP
> disabled.
>     > Carp has for sure 3 IPs. 2 Dedicated for each Server and one CARP
> (Virtual
>     > Failover per Subnet)
>     >
>     >
>     > --
>     > Grüsse
>     >
>     > Daniel
>     >
>     > Am 06.06.17, 00:04 schrieb "List im Auftrag von Ugo Bellavance" <
>     > [email protected] im Auftrag von [email protected]>:
>     >
>     >     On 2017-06-02 08:13 AM, Daniel wrote:
>     >     > Hi there,
>     >     >
>     >     > i run 2 pfsense Firewalls. I tried to use CARP but it will
> turn over
>     > every 1-2-3 hours.
>     >     > Sometimes it is so fast the pf1 is master and pf2 has the
> routes. In
>     > this case I need to reboot the both Servers.
>     >     >
>     >     > After I tried a lot id ont find any solutions. I took a
> different
>     > brand (Sophos UTM) and here is the same behave.
>     >     > So I think this could be a network problem.
>     >     >
>     >     > Is there any important thinks which must be enabled or
> disabled in
>     > the Switch?
>     >     > Or need the Switch some special configurations?
>     >     >
>     >     > When I use Linux with Bondig it also switch the NICs very
> often.
>     >     >
>     >     > We use 2 Switches from Netgear JGS524Ev2
>     >     >
>     >     > Mayme someone has some experience with it?
>     >
>     >     Can you give us more information? You do have 3 IP addresses per
>     >     interface? How is your switch configured? Any tagged vLANs
> involved? Is
>     >     the switch's firmware up to date?
>     >
>     >     _______________________________________________
>     >     pfSense mailing list
>     >     https://lists.pfsense.org/mailman/listinfo/list
>     >     Support the project with Gold! https://pfsense.org/gold
>     >
>     >
>     > _______________________________________________
>     > pfSense mailing list
>     > https://lists.pfsense.org/mailman/listinfo/list
>     > Support the project with Gold! https://pfsense.org/gold
>
>
>
>
>     --
>     Ivo R. Tonev
>     +55 61 98409-2642
>     [email protected]
>     _______________________________________________
>     pfSense mailing list
>     https://lists.pfsense.org/mailman/listinfo/list
>     Support the project with Gold! https://pfsense.org/gold
>
> _______________________________________________
> pfSense mailing list
> https://lists.pfsense.org/mailman/listinfo/list
> Support the project with Gold! https://pfsense.org/gold
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold

Reply via email to