Firewalls are virtual or physical servers? On Wed, Jun 7, 2017 at 9:12 AM, Daniel <[email protected]> wrote:
> Hi, > > Firewall on the Switch is the latest installed. > The Switch is just simple installed. No VLANS actually just IGMP disabled. > Carp has for sure 3 IPs. 2 Dedicated for each Server and one CARP (Virtual > Failover per Subnet) > > > -- > Grüsse > > Daniel > > Am 06.06.17, 00:04 schrieb "List im Auftrag von Ugo Bellavance" < > [email protected] im Auftrag von [email protected]>: > > On 2017-06-02 08:13 AM, Daniel wrote: > > Hi there, > > > > i run 2 pfsense Firewalls. I tried to use CARP but it will turn over > every 1-2-3 hours. > > Sometimes it is so fast the pf1 is master and pf2 has the routes. In > this case I need to reboot the both Servers. > > > > After I tried a lot id ont find any solutions. I took a different > brand (Sophos UTM) and here is the same behave. > > So I think this could be a network problem. > > > > Is there any important thinks which must be enabled or disabled in > the Switch? > > Or need the Switch some special configurations? > > > > When I use Linux with Bondig it also switch the NICs very often. > > > > We use 2 Switches from Netgear JGS524Ev2 > > > > Mayme someone has some experience with it? > > Can you give us more information? You do have 3 IP addresses per > interface? How is your switch configured? Any tagged vLANs involved? Is > the switch's firmware up to date? > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold -- Ivo R. Tonev +55 61 98409-2642 [email protected] _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
