Why not put the sprocket on and lock it in place with a sheer pin...
that way if it does lock up, its going to shear off the pin, and not
break anything else.


On 8/10/07, dale henderson <[EMAIL PROTECTED]> wrote:
> i agree with you, but i can't imagin the bidirectional being cheaper.  i'll
> try to find some other alternative.  i think using two bidirectionals could
> get close to $1900, plus two good DC PMs for $1500 more and a good
> controller [regen] $600+.  thats $4000 while an AC system of the same power
> is about $5000
>
> speaking of alternatvies does any one have any input on what would happen to
> a belted torque converter if the motor locked up? would it slip?
>
>
> Bob Martin <[EMAIL PROTECTED]> wrote:
>
>
> I like the bidirectional so you can still use regenerative braking. I'm
> kinda paranoid about motor lock-up too, but I don't want to give up the
> regen.
>
> ----- Original Message -----
> From: dale henderson
> To: ElectricMotorcycles
> Sent: Thursday, August 09, 2007 1:43 PM
> Subject: Re: [ElectricMotorcycles] More on motors
>
>
> for the MT-130 and MT-60 make sure you check the max rpm for the driven
> [i.e. the motor] i think those are only rated for 1500 and 2600 rpm,
> respectfuly.  also check the price!  i did find something that would snap
> right on to an etek and would work up 3600 rpm its the FSO-400 from
> formsprag
> [http://www.formsprag.com/PDF/P-956-FC_pg014-015.pdf] but
> their list price was $800 [dealer $500]!!!
>
> "Seth A. Keel" <[EMAIL PROTECTED]> wrote:
>
> This is a good company for freewheels. They are probably who I will
> order from, but it's not all that clear what's what from their website.
> The sales rep suggested the MT-130B, but that's too big, so I think,
> like explained in the last message, that I'll turn the drive shaft down
> to 3/4" and go for the MT-60, though I'm still not sure what the
> difference between the A B and C versions is. I assume it's mounting
> options. Hopefully, I can call tomorrow to clarify and possibly order.
> http://www.hilliardcorp.com/overrunning-clutch.html
>
>
> Albuquerque, NM
> http://geocities.com/hendersonmotorcycles/blog.html
> http://www.austinev.org/evalbum/1000
> http://www.austinev.org/evalbum/1179
> http://www.austinev.org/evalbum/1221
> http://geocities.com/solarcookingman
>  ________________________________
>  Luggage? GPS? Comic books?
> Check out fitting gifts for grads at Yahoo! Search.
>
>
> Albuquerque, NM
> http://geocities.com/hendersonmotorcycles/blog.html
> http://www.austinev.org/evalbum/1000
> http://www.austinev.org/evalbum/1179
> http://www.austinev.org/evalbum/1221
> http://geocities.com/solarcookingman
>
>  ________________________________
> Looking for a deal? Find great prices on flights and hotels with Yahoo!
> FareChase.
>
>

Reply via email to