Ken It might seem daft but if you have the time, could you walk me through HOW you tested it. I've been working with Stephen on getting this chip to be seen by my computer but had little luck thus far.
Cheers James On 20 Apr 2015 6:36 pm, "Ken Pettit" <[email protected]> wrote: > Hmm, > > I actually tested the unit prior to shipping it, so I know it worked at > one point. When I get home, I'll have to check my stock of REX100 … I > think I may be out. > > Steve, you were going to build up a few more REX100s I think … have you > made any progress on that front? > > Ken > > On Mon, Apr 20, 2015 at 5:55 AM, Stephen Adolph <[email protected]> > wrote: > >> Probably defective then. Lately my soldering has been a little less >> reliable. >> >> On Mon, Apr 20, 2015 at 8:53 AM, <[email protected]> wrote: >> >>> Just confirmed I have the chip installed correctly, but the command to >>> active it does not appear to be working and I don't have a spare trs80 >>> hanging around to see if this is a fault with my computer. I've adjusted >>> the pins to make sure the REX is making good contact, but nothing happens. >>> I type in the call 63012 command and the machine just sits there doing >>> nothing, all I can do is reset it. >>> >>> Sent from my iPad >>> >>> On 20 Apr 2015, at 1:10 pm, Joe Grubbs <[email protected]> wrote: >>> >>> Well shoot, I feel unloved :( I requested one on Feb 6th. >>> >>> I'll stop hijacking your thread now, sorry. >>> >>> >>> >>> ------------------------------ >>> From: [email protected] >>> Date: Mon, 20 Apr 2015 13:05:25 +0100 >>> To: [email protected] >>> Subject: Re: [M100] Received my REX but there's a problem >>> >>> Ken at club100 sorted me one out, I'm sure he would be happy to help you >>> >>> >>> Sent from my iPad >>> >>> On 20 Apr 2015, at 12:59 pm, Joe Grubbs <[email protected]> wrote: >>> >>> You got a REX? Where did you obtain it? I'd love to get one for my 200. >>> >>> >>> >>> > From: [email protected] >>> > Date: Mon, 20 Apr 2015 12:05:02 +0100 >>> > To: [email protected] >>> > Subject: [M100] Received my REX but there's a problem >>> > >>> > Hey everyone >>> > >>> > I just got my REX In the post, followed the guide on wiki as the >>> printed manual seems to be for an earlier module. I have it installed as it >>> shown on the guide but I'm not seeing anything appearing on my menu. As I >>> understand it, I should see a new program listed for accessing my REX >>> module. Can anyone help please, I've been waiting ages for this to arrive, >>> I dont want to think it's arrived DOA. >>> > >>> > Cheers >>> > James >>> >>> >> >
