I have tested on an 8k machine. That should not be a problem..
On Monday, April 20, 2015, bogus maximus <[email protected]> wrote: > Is that M100 "unexpanded, plain vanilla", meaning 8K? If so, would that be an issue? > > Bogdan > > On Mon, Apr 20, 2015 at 6:26 AM, Stephen Adolph <[email protected]> wrote: >> >> Please get the cold restart thing understood and applied here. If you haven't done that yet then it likely needs it! >> Steve >> >> On Monday, April 20, 2015, <[email protected]> wrote: >> > Oh no! That would suck! Will I be able to get a replacement of Ken? >> > >> > Sent from my iPad >> > On 20 Apr 2015, at 1:55 pm, Stephen Adolph <[email protected]> wrote: >> > >> > Probably defective then. Lately my soldering has been a little less reliable. >> > >> > On Mon, Apr 20, 2015 at 8:53 AM, <[email protected]> wrote: >> >> >> >> Just confirmed I have the chip installed correctly, but the command to active it does not appear to be working and I don't have a spare trs80 hanging around to see if this is a fault with my computer. I've adjusted the pins to make sure the REX is making good contact, but nothing happens. I type in the call 63012 command and the machine just sits there doing nothing, all I can do is reset it. >> >> >> >> Sent from my iPad >> >> On 20 Apr 2015, at 1:10 pm, Joe Grubbs <[email protected]> wrote: >> >> >> >> Well shoot, I feel unloved :( I requested one on Feb 6th. >> >> >> >> I'll stop hijacking your thread now, sorry. >> >> >> >> >> >> >> >> ________________________________ >> >> From: [email protected] >> >> Date: Mon, 20 Apr 2015 13:05:25 +0100 >> >> To: [email protected] >> >> Subject: Re: [M100] Received my REX but there's a problem >> >> >> >> Ken at club100 sorted me one out, I'm sure he would be happy to help you >> >> >> >> Sent from my iPad >> >> On 20 Apr 2015, at 12:59 pm, Joe Grubbs <[email protected]> wrote: >> >> >> >> You got a REX? Where did you obtain it? I'd love to get one for my 200. >> >> >> >> >> >> >> >> > From: [email protected] >> >> > Date: Mon, 20 Apr 2015 12:05:02 +0100 >> >> > To: [email protected] >> >> > Subject: [M100] Received my REX but there's a problem >> >> > >> >> > Hey everyone >> >> > >> >> > I just got my REX In the post, followed the guide on wiki as the printed manual seems to be for an earlier module. I have it installed as it shown on the guide but I'm not seeing anything appearing on my menu. As I understand it, I should see a new program listed for accessing my REX module. Can anyone help please, I've been waiting ages for this to arrive, I dont want to think it's arrived DOA. >> >> > >> >> > Cheers >> >> > James >> > >> > >
