here is link to the picture i sent Stephen https://drive.google.com/file/d/0Bw_gYOWg5M0dU0lpX004Zm1nNWs/view?usp=sharing
Unicorn 100?? Someone will have to explain as i'm still new to all of this :-) On 20 April 2015 at 20:51, Stephen Adolph <[email protected]> wrote: > The thing that needs clarification here > > 1) for EU models of M100 - what motherboard was standard? > 2) the motherboard code is PLX120BH1X - is that the same is KC-85? > 3) for that motherboard code, it clearly uses the MOLEX connector but what > is the pinout? One would assume the same as any other M100. > > > > > On Mon, Apr 20, 2015 at 3:47 PM, Joe Grubbs <[email protected]> wrote: > >> Oh wow! You have a Unicorn 100 :) >> >> I'm glad it sounds like you have it figured out. Do you plan to keep it >> or get another 100? >> >> >> ------------------------------ >> Date: Mon, 20 Apr 2015 20:45:14 +0100 >> From: [email protected] >> >> To: [email protected] >> Subject: Re: [M100] Received my REX but there's a problem >> >> Well i think we might have figured out why the REX is not working. I sent >> a photo of my TRS80 M100 to Stephen and he asked me what the heck I was >> using. Turns out the guts of my M100 resemble a Kyotronic KC-85 more >> then they do a Tandy M100. So it's a good bet this is why the REX isn't >> working. Another indication is the lack of a modem connector on the >> motherboard. The case has a blanking plate covering where the port should >> be. >> >> Stephen has suggested that someone has swapped the internals in my M100, >> so it's a KC85 in a Tandy case. However having looked inside this machine, >> i have to say it looks really clean and tidy. If i didn't know better, i >> would say it was sold like this originally. But i've not owned my m100 / >> KC85 for that long, so can't really say. >> >> James >> >> >> >> On 20 April 2015 at 19:47, Frederick Whitaker <[email protected]> >> wrote: >> >> When I received my first REX I had to make sure that all the little pins >> in the socket made contact, I had to do a complete restart, and only then >> did I get a response from the CALL63012. I know from experience that >> programs in memory can interfere with the call. Don't assume yet that you >> have a bad solder connection. Try it again and don't be in a hurry. >> >> Fred W. >> >> Sent from my iPhone >> >> On Apr 20, 2015, at 1:40 PM, James Zeun <[email protected]> wrote: >> >> Ken >> >> It might seem daft but if you have the time, could you walk me through >> HOW you tested it. I've been working with Stephen on getting this chip to >> be seen by my computer but had little luck thus far. >> >> Cheers >> James >> On 20 Apr 2015 6:36 pm, "Ken Pettit" <[email protected]> wrote: >> >> Hmm, >> >> I actually tested the unit prior to shipping it, so I know it worked at >> one point. When I get home, I'll have to check my stock of REX100 … I >> think I may be out. >> >> Steve, you were going to build up a few more REX100s I think … have you >> made any progress on that front? >> >> Ken >> >> On Mon, Apr 20, 2015 at 5:55 AM, Stephen Adolph <[email protected]> >> wrote: >> >> Probably defective then. Lately my soldering has been a little less >> reliable. >> >> On Mon, Apr 20, 2015 at 8:53 AM, <[email protected]> wrote: >> >> Just confirmed I have the chip installed correctly, but the command to >> active it does not appear to be working and I don't have a spare trs80 >> hanging around to see if this is a fault with my computer. I've adjusted >> the pins to make sure the REX is making good contact, but nothing happens. >> I type in the call 63012 command and the machine just sits there doing >> nothing, all I can do is reset it. >> >> Sent from my iPad >> >> On 20 Apr 2015, at 1:10 pm, Joe Grubbs <[email protected]> wrote: >> >> Well shoot, I feel unloved :( I requested one on Feb 6th. >> >> I'll stop hijacking your thread now, sorry. >> >> >> >> ------------------------------ >> From: [email protected] >> Date: Mon, 20 Apr 2015 13:05:25 +0100 >> To: [email protected] >> Subject: Re: [M100] Received my REX but there's a problem >> >> Ken at club100 sorted me one out, I'm sure he would be happy to help you >> >> >> Sent from my iPad >> >> On 20 Apr 2015, at 12:59 pm, Joe Grubbs <[email protected]> wrote: >> >> You got a REX? Where did you obtain it? I'd love to get one for my 200. >> >> >> >> > From: [email protected] >> > Date: Mon, 20 Apr 2015 12:05:02 +0100 >> > To: [email protected] >> > Subject: [M100] Received my REX but there's a problem >> > >> > Hey everyone >> > >> > I just got my REX In the post, followed the guide on wiki as the >> printed manual seems to be for an earlier module. I have it installed as it >> shown on the guide but I'm not seeing anything appearing on my menu. As I >> understand it, I should see a new program listed for accessing my REX >> module. Can anyone help please, I've been waiting ages for this to arrive, >> I dont want to think it's arrived DOA. >> > >> > Cheers >> > James >> >> >> >> >> >> >> -- >> My retro tech blog and general ramblings >> http://bytemyvdu.wordpress.com/ >> > > -- My retro tech blog and general ramblings http://bytemyvdu.wordpress.com/
