It seems to be communicating (ie. I can successfully load and save .BX files from Rex). But I am not able to see them once I browse to them on Android. Also, when I load a .BX file I cannot get it to work, but something does make it into the Tandy. I haven't had any luck with TS-DOS or NDOS for some reason.
Tom On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum <[email protected]> wrote: > I finally got mComm for Android buttoned up and ready for those interested > in testing it. > > You will need an android phone and a cable to go from the phone to your > Model-T. I use a micro USB to regular USB adapter such as this one. > Micro Adapter <http://www.ebay.com/itm/311201513107> > > Then I plug in an FTDI USB to serial adapter like this one. > FTDI Adapter > <http://www.ebay.com/itm/FTDI-Chipset-High-Speed-USB-2-0-to-Serial-RS-232-DB-9-Converter-LIFETIME-Warrty-/222001508186> > > Then I plug in a Null modem cross over adapter like this one. > Cross over adapter <http://www.ebay.com/itm/280817525127> > > And finally, I attach a regular db9 to db 25 serial converter. > Here is a USB to serial converter that has one. > db9 to db25 <http://www.ebay.com/itm/261515248400> > The above usb to serial adapter could be used in place of the FTDI adapter > but I have not tested with that chipset yet. > > Most of you probably already have a cable that will work. It only requires > RX/TX/GND/CTS/RTS signals. > > You will need to download the APK file to your Android device and install > it with one of the APK installers that are found on Google play. > > Once installed, hook up the cable and press the "Start TPDD Service" > button. The first time it will ask you for permission to attach to the > serial port and you end up having to press the start button again. After > that you are ready to go. Not much else to it visually other than the hex > data streams for input and output. > > Let me know if you have issue with it. The download folder is below. > File location > <http://www.club100.org/memfiles/index.php?direction=&order=&directory=Kurt%20McCullum/mComm%20Android&;> > > Kurt >
