Tom,
I've noticed that last night. I've got a fix but have not uploaded it yet. The
files are stored in a folder called TPDD under the default internal directory.
This is the same place that the DCIM (Pictures) folder is. But with the current
version, even through the folder and files are there, they are not visible.
I'll upload the fix tonight.
If you have a file manager, browse to the TPDD folder and you should see the
files.
What response are you getting when you use TS-DOS? I'm using the RAM versions
right now.
Kurt
On Friday, January 29, 2016 2:10 PM, Tom Hoppe <[email protected]> wrote:
It seems to be communicating (ie. I can successfully load and save .BX files
from Rex). But I am not able to see them once I browse to them on Android.
Also, when I load a .BX file I cannot get it to work, but something does make
it into the Tandy. I haven't had any luck with TS-DOS or NDOS for some reason.
Tom
On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum <[email protected]> wrote:
I finally got mComm for Android buttoned up and ready for those interested in
testing it.
You will need an android phone and a cable to go from the phone to your
Model-T. I use a micro USB to regular USB adapter such as this one.
Micro Adapter
Then I plug in an FTDI USB to serial adapter like this one.
FTDI Adapter
Then I plug in a Null modem cross over adapter like this one.
Cross over adapter
And finally, I attach a regular db9 to db 25 serial converter.
Here is a USB to serial converter that has one.
db9 to db25
The above usb to serial adapter could be used in place of the FTDI adapter but
I have not tested with that chipset yet.
Most of you probably already have a cable that will work. It only requires
RX/TX/GND/CTS/RTS signals.
You will need to download the APK file to your Android device and install it
with one of the APK installers that are found on Google play.
Once installed, hook up the cable and press the "Start TPDD Service" button.
The first time it will ask you for permission to attach to the serial port and
you end up having to press the start button again. After that you are ready to
go. Not much else to it visually other than the hex data streams for input and
output.
Let me know if you have issue with it. The download folder is below.
File location
Kurt
