Hey Kurt Got a bulk standard Nexus 5 running lollipop 6.0.1
Will try mComm 0.6 and let you know as well cheers On Sat, Jan 30, 2016 at 3:44 PM, Kurt McCullum <[email protected]> wrote: > Thank Daryn, > > That's good to hear that it's working on your unit. Can I ask what Android > device you are using and what version of the OS? > > Kurt > > > On 1/29/2016 6:36 PM, Daryn Hanright wrote: > > WOO! Amazing! > > Works perfectly. In Android home from the TPDD dir was able to save and > load notepad files using good old TEENY on my 102. > > Well done mate! > > cheers > Daryn > > > > On Sat, Jan 30, 2016 at 1:51 PM, Tom Hoppe <[email protected]> wrote: > >> Kurt, >> >> I was using the ROM-based TS-DOS and NDOS (through Rex). It just seems to >> hang and requires a reset of the M100 to get out. I have had this issue >> before, so I'm certain what the cause is. >> >> Tom >> >> On Fri, Jan 29, 2016 at 2:25 PM, Kurt McCullum < <[email protected]> >> [email protected]> wrote: >> >>> Tom, >>> >>> I've noticed that last night. I've got a fix but have not uploaded it >>> yet. The files are stored in a folder called TPDD under the default >>> internal directory. This is the same place that the DCIM (Pictures) folder >>> is. But with the current version, even through the folder and files are >>> there, they are not visible. I'll upload the fix tonight. >>> >>> If you have a file manager, browse to the TPDD folder and you should see >>> the files. >>> >>> What response are you getting when you use TS-DOS? I'm using the RAM >>> versions right now. >>> >>> Kurt >>> >>> >>> On Friday, January 29, 2016 2:10 PM, Tom Hoppe < <[email protected]> >>> [email protected]> wrote: >>> >>> >>> It seems to be communicating (ie. I can successfully load and save .BX >>> files from Rex). But I am not able to see them once I browse to them on >>> Android. Also, when I load a .BX file I cannot get it to work, >>> but something does make it into the Tandy. I haven't had any luck with >>> TS-DOS or NDOS for some reason. >>> >>> Tom >>> >>> On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum < <[email protected]> >>> [email protected]> wrote: >>> >>> I finally got mComm for Android buttoned up and ready for those >>> interested in testing it. >>> >>> You will need an android phone and a cable to go from the phone to your >>> Model-T. I use a micro USB to regular USB adapter such as this one. >>> Micro Adapter <http://www.ebay.com/itm/311201513107> >>> >>> Then I plug in an FTDI USB to serial adapter like this one. >>> FTDI Adapter >>> <http://www.ebay.com/itm/FTDI-Chipset-High-Speed-USB-2-0-to-Serial-RS-232-DB-9-Converter-LIFETIME-Warrty-/222001508186> >>> >>> Then I plug in a Null modem cross over adapter like this one. >>> Cross over adapter <http://www.ebay.com/itm/280817525127> >>> >>> And finally, I attach a regular db9 to db 25 serial converter. >>> Here is a USB to serial converter that has one. >>> db9 to db25 <http://www.ebay.com/itm/261515248400> >>> The above usb to serial adapter could be used in place of the FTDI >>> adapter but I have not tested with that chipset yet. >>> >>> Most of you probably already have a cable that will work. It only >>> requires RX/TX/GND/CTS/RTS signals. >>> >>> You will need to download the APK file to your Android device and >>> install it with one of the APK installers that are found on Google play. >>> >>> Once installed, hook up the cable and press the "Start TPDD Service" >>> button. The first time it will ask you for permission to attach to the >>> serial port and you end up having to press the start button again. After >>> that you are ready to go. Not much else to it visually other than the hex >>> data streams for input and output. >>> >>> Let me know if you have issue with it. The download folder is below. >>> File location >>> <http://www.club100.org/memfiles/index.php?direction=&order=&directory=Kurt%20McCullum/mComm%20Android&;> >>> >>> Kurt >>> >>> >>> >>> >>> >> > >
