Thank Daryn,
That's good to hear that it's working on your unit. Can I ask what
Android device you are using and what version of the OS?
Kurt
On 1/29/2016 6:36 PM, Daryn Hanright wrote:
WOO! Amazing!
Works perfectly. In Android home from the TPDD dir was able to save
and load notepad files using good old TEENY on my 102.
Well done mate!
cheers
Daryn
On Sat, Jan 30, 2016 at 1:51 PM, Tom Hoppe <[email protected]
<mailto:[email protected]>> wrote:
Kurt,
I was using the ROM-based TS-DOS and NDOS (through Rex). It just
seems to hang and requires a reset of the M100 to get out. I have
had this issue before, so I'm certain what the cause is.
Tom
On Fri, Jan 29, 2016 at 2:25 PM, Kurt McCullum
<[email protected] <mailto:[email protected]>> wrote:
Tom,
I've noticed that last night. I've got a fix but have not
uploaded it yet. The files are stored in a folder called TPDD
under the default internal directory. This is the same place
that the DCIM (Pictures) folder is. But with the current
version, even through the folder and files are there, they are
not visible. I'll upload the fix tonight.
If you have a file manager, browse to the TPDD folder and you
should see the files.
What response are you getting when you use TS-DOS? I'm using
the RAM versions right now.
Kurt
On Friday, January 29, 2016 2:10 PM, Tom Hoppe
<[email protected] <mailto:[email protected]>> wrote:
It seems to be communicating (ie. I can successfully load and
save .BX files from Rex). But I am not able to see them once I
browse to them on Android. Also, when I load a .BX file I
cannot get it to work, but something does make it into the
Tandy. I haven't had any luck with TS-DOS or NDOS for some reason.
Tom
On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum
<[email protected] <mailto:[email protected]>> wrote:
I finally got mComm for Android buttoned up and ready for
those interested in testing it.
You will need an android phone and a cable to go from the
phone to your Model-T. I use a micro USB to regular USB
adapter such as this one.
Micro Adapter <http://www.ebay.com/itm/311201513107>
Then I plug in an FTDI USB to serial adapter like this one.
FTDI Adapter
<http://www.ebay.com/itm/FTDI-Chipset-High-Speed-USB-2-0-to-Serial-RS-232-DB-9-Converter-LIFETIME-Warrty-/222001508186>
Then I plug in a Null modem cross over adapter like this one.
Cross over adapter <http://www.ebay.com/itm/280817525127>
And finally, I attach a regular db9 to db 25 serial converter.
Here is a USB to serial converter that has one.
db9 to db25 <http://www.ebay.com/itm/261515248400>
The above usb to serial adapter could be used in place of
the FTDI adapter but I have not tested with that chipset yet.
Most of you probably already have a cable that will work.
It only requires RX/TX/GND/CTS/RTS signals.
You will need to download the APK file to your Android
device and install it with one of the APK installers that
are found on Google play.
Once installed, hook up the cable and press the "Start
TPDD Service" button. The first time it will ask you for
permission to attach to the serial port and you end up
having to press the start button again. After that you are
ready to go. Not much else to it visually other than the
hex data streams for input and output.
Let me know if you have issue with it. The download folder
is below.
File location
<http://www.club100.org/memfiles/index.php?direction=&order=&directory=Kurt%20McCullum/mComm%20Android&;>
Kurt
