WOO! Amazing! Works perfectly. In Android home from the TPDD dir was able to save and load notepad files using good old TEENY on my 102.
Well done mate! cheers Daryn On Sat, Jan 30, 2016 at 1:51 PM, Tom Hoppe <[email protected]> wrote: > Kurt, > > I was using the ROM-based TS-DOS and NDOS (through Rex). It just seems to > hang and requires a reset of the M100 to get out. I have had this issue > before, so I'm certain what the cause is. > > Tom > > On Fri, Jan 29, 2016 at 2:25 PM, Kurt McCullum <[email protected]> > wrote: > >> Tom, >> >> I've noticed that last night. I've got a fix but have not uploaded it >> yet. The files are stored in a folder called TPDD under the default >> internal directory. This is the same place that the DCIM (Pictures) folder >> is. But with the current version, even through the folder and files are >> there, they are not visible. I'll upload the fix tonight. >> >> If you have a file manager, browse to the TPDD folder and you should see >> the files. >> >> What response are you getting when you use TS-DOS? I'm using the RAM >> versions right now. >> >> Kurt >> >> >> On Friday, January 29, 2016 2:10 PM, Tom Hoppe <[email protected]> wrote: >> >> >> It seems to be communicating (ie. I can successfully load and save .BX >> files from Rex). But I am not able to see them once I browse to them on >> Android. Also, when I load a .BX file I cannot get it to work, >> but something does make it into the Tandy. I haven't had any luck with >> TS-DOS or NDOS for some reason. >> >> Tom >> >> On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum <[email protected]> >> wrote: >> >> I finally got mComm for Android buttoned up and ready for those >> interested in testing it. >> >> You will need an android phone and a cable to go from the phone to your >> Model-T. I use a micro USB to regular USB adapter such as this one. >> Micro Adapter <http://www.ebay.com/itm/311201513107> >> >> Then I plug in an FTDI USB to serial adapter like this one. >> FTDI Adapter >> <http://www.ebay.com/itm/FTDI-Chipset-High-Speed-USB-2-0-to-Serial-RS-232-DB-9-Converter-LIFETIME-Warrty-/222001508186> >> >> Then I plug in a Null modem cross over adapter like this one. >> Cross over adapter <http://www.ebay.com/itm/280817525127> >> >> And finally, I attach a regular db9 to db 25 serial converter. >> Here is a USB to serial converter that has one. >> db9 to db25 <http://www.ebay.com/itm/261515248400> >> The above usb to serial adapter could be used in place of the FTDI >> adapter but I have not tested with that chipset yet. >> >> Most of you probably already have a cable that will work. It only >> requires RX/TX/GND/CTS/RTS signals. >> >> You will need to download the APK file to your Android device and install >> it with one of the APK installers that are found on Google play. >> >> Once installed, hook up the cable and press the "Start TPDD Service" >> button. The first time it will ask you for permission to attach to the >> serial port and you end up having to press the start button again. After >> that you are ready to go. Not much else to it visually other than the hex >> data streams for input and output. >> >> Let me know if you have issue with it. The download folder is below. >> File location >> <http://www.club100.org/memfiles/index.php?direction=&order=&directory=Kurt%20McCullum/mComm%20Android&;> >> >> Kurt >> >> >> >> >> >
