The generic answer to that question is yes.  However, caps properly
speced/used properly will last MUCH longer, especially in a dis-charged
state.  It's not uncommon for caps to still be good after 30 years.

On Thu, Jul 26, 2018 at 6:01 PM Brian White <[email protected]> wrote:

> Don't the caps leak eventually, the same as batteries, and so there is no
> advantage? I used nimh on all mine.
>
> On Wed, Jul 25, 2018 at 4:49 PM Andy Lawrence <[email protected]> wrote:
>
>> One additional note to my Supercap mod, I the cap I listed above it not
>> the correct lead spacing and was hacked in, that particular cap I had on
>> hand from another project, FYI.
>>
>> BR,
>>
>>
>>
>> On Wed, Jul 25, 2018 at 1:36 PM Andy Lawrence <[email protected]>
>> wrote:
>>
>>> Hi Greg,
>>>
>>> My wife had some #40 developer, it was the consistency of water, but I
>>> didn't log the necessary info before trashing the container, my apologies.
>>> The screen on my T102 isn't in great shape, but I didn't notice any damage
>>> from the developer, thought maybe I'd replace it with a piece of custom
>>> glass.  However I've not really thought that through yet.
>>>
>>> BR,
>>> Andy
>>>
>>>
>>> On Wed, Jul 25, 2018 at 1:02 PM Greg Swallow <[email protected]> wrote:
>>>
>>>> Glad to be of help Andy.
>>>>
>>>> May I ask which method of Retro Briting did you use. I jave made my own
>>>> "cream"
>>>> compound before, but have gotten the 40 Cream Hair Developer for my
>>>> next try. A
>>>> couple of M100 screens got scarred the last time; I used masking tape.
>>>> This time
>>>> I've gotten Frog Tape, but am wondering what you, and others, have done
>>>> to avoid
>>>> getting the H2 on the clear plastic screen cover. If there is a way to
>>>> remove the
>>>> clear part from the case, I have not been able to figure it out.
>>>>
>>>> God Bless,
>>>>
>>>> GregS <><
>>>>
>>>> ----- Original Message -----
>>>> From: "Andy Lawrence" <[email protected]>
>>>> To: [email protected]
>>>> Sent: Wednesday, July 25, 2018 9:11:18 AM
>>>> Subject: [M100] New User - Resurrected T102
>>>>
>>>> Hello All,
>>>>
>>>> I was born in 1975, and throughout the 80s I looked forward to the
>>>> annual
>>>> Radio Shack catalogs, each year drooling over the T100/2s etc!  Well a
>>>> couple weeks ago I was cruising eBay and ran across a busted T102 and
>>>> snatched it up cheap.  Completed the following to fix it up:
>>>>
>>>> - Restored normal functionality by re-soldering the DC jack.
>>>> - Burned y2k ROM, thanks to GregS for pointing out the file location.  I
>>>> was planning to burn on a stash of old 27c256s, but appears I've used
>>>> all
>>>> of those, rather than eBaying surplus I simply ordered an
>>>> AT27C256R-70PU-ND
>>>> from Digikey for $1.38.  This also saved me 2mA.
>>>> - Swapped the leaking NiCad for a 4F Supercap, Digikey part 4704PHBK-ND.
>>>> - Swapped the original 32.768k crystal for a Digikey part 300-8763-ND,
>>>> which is 4PPM part, though I didn't test the original this new part
>>>> should
>>>> help keep better time.
>>>> - Followed the 8-Bit Guy's YouTube's guide to "Retro Bright" the
>>>> yellowed
>>>> plastic, which turned out great aside from slightly damaging the Tandy
>>>> T102
>>>> black plastic emblem by getting it too warm.  :crying:  Anybody have
>>>> one of
>>>> these laying around?  I was utilizing a halogen lamp to warm the
>>>> solution,
>>>> got it too close...
>>>>
>>>> Though I don't have any specific plans for the T102 (right now it's
>>>> calculating prime numbers), I've already acquired a T200, which will
>>>> receive similar treatment!
>>>>
>>>> I'm really glad to see communities like this still active, brings back
>>>> such
>>>> great memories!  I might even start a retro Z80/68000/etc or similar
>>>> build,
>>>> fun times ahead.
>>>>
>>>> Many thanks to all and have a great day.
>>>> Andy
>>>>
>>>
>>>
>>> --
>>> projecthuh.com
>>> Never underestimate the carelessness of boredom...
>>> Most people prefer Windows because most people are idiots...
>>>
>>>
>>
>> --
>> projecthuh.com
>> Never underestimate the carelessness of boredom...
>> Most people prefer Windows because most people are idiots...
>>
>>
>
>

-- 
projecthuh.com
Never underestimate the carelessness of boredom...
Most people prefer Windows because most people are idiots...

Reply via email to