Great work Brian! Definitely a clean working solution. Kurt
On Thu, Jun 6, 2019, at 9:56 PM, Brian White wrote: > These hoods from mouser came in, and they are perfect. > > So, if you're willing to deal with crimping pins for a dupont style > connector, the Rick Shear pcb fits in this housing with no grief, and the > assembled housing fits in a Model 100 with no problem and no hacking needed. > > https://photos.app.goo.gl/MN3VEmhEbqehxEzh8 > > Scroll to the end. > > I'm still trying to make a new tiny pcb that goes on the tpdd instead, and > you solder a factory molded serial cable to that, but until I get that, > Rick's existing pcb plus this enclosure (and this digikey order minus the > hoods) works great and supports all models and doesn't look too shabby either. > > So that's a tolerably doable tpdd cable recipe on the books, a little more > realistic and straight-forward than the raw Marty Goodman schematic. > > http://tandy.wiki/TPDD#Cable > > Thanks Rick and Mike. > > -- > bkw > > On Sat, Jun 1, 2019, 5:32 PM Mike Stein <[email protected]> wrote: >> __ >> Mouser shows a couple that look like they might fit: >> >> https://www.mouser.ca/ProductDetail/HARTING/09670250513?qs=sGAEpiMZZMu5A18b%252BIx2GqJxiHQ0oido%2FVfUIPfHQk4%3D >> >> https://www.mouser.ca/ProductDetail/HARTING/09670250411?qs=sGAEpiMZZMu5A18b%252BIx2GqJxiHQ0oido1QO%2FNnySBX8%3D >>> ----- Original Message ----- >>> *From:* Brian White <mailto:[email protected]> >>> *To:* Model 100 Discussion <mailto:[email protected]> >>> *Sent:* Saturday, June 01, 2019 1:19 PM >>> *Subject:* [M100] dsub 25 hood that fits >>> >>> Anyone ever find a dsub 25 hood that fits in the serial port openeing on >>> M100? >>> >>> -- >>> bkw
