Just got told on twitter i have to mod the wifi32 for use with the T200.
The m100/102 doesn't require rts/cts to be enabled on the modem but the
t200 does.
-Russell
On 10/4/2019 4:12 PM, Russell Davis wrote:
Going slowly potty. I have a WiFI32 which is a wifi "modem" (esp8266
and some serial glue) and it works perfectly on the M102 with or
without flow control set in stat (58N1D and 58N1E) but I can't get it
to work to work on the T200. set STAT to 58N1ENN, 58N1DNN, 58N1DNI,...
and in TERM if I type a character it freezes hard. only thing that
works is to power cycle. if i'm in bank 2 it seems to return to the
telcom program and next character appears but typing another character
freezes the T200 again. I suspect it's something to do with flow
control but completely flummuxed.
Are there major differences between the M100/102's rs232 and the
T200's? or could the REX that is in the T200 be causing problems? I
can't see how it could be but i'm grasping at any straws that could be
around.
bst rgrds
Russell
