Yes the 200 requires rts cts even when not set in TERM. This has bit me many
times.
Kurt
On Fri, Oct 4, 2019, at 2:11 PM, Stephen Adolph wrote:
> that's news. not sure I believe that.
>
> On Fri, Oct 4, 2019 at 5:10 PM Russell Davis <[email protected]> wrote:
>> Just got told on twitter i have to mod the wifi32 for use with the T200.
>> The m100/102 doesn't require rts/cts to be enabled on the modem but the
>> t200 does.
>>
>>
>> -Russell
>>
>> On 10/4/2019 4:12 PM, Russell Davis wrote:
>> > Going slowly potty. I have a WiFI32 which is a wifi "modem" (esp8266
>> > and some serial glue) and it works perfectly on the M102 with or
>> > without flow control set in stat (58N1D and 58N1E) but I can't get it
>> > to work to work on the T200. set STAT to 58N1ENN, 58N1DNN, 58N1DNI,...
>> > and in TERM if I type a character it freezes hard. only thing that
>> > works is to power cycle. if i'm in bank 2 it seems to return to the
>> > telcom program and next character appears but typing another character
>> > freezes the T200 again. I suspect it's something to do with flow
>> > control but completely flummuxed.
>> >
>> > Are there major differences between the M100/102's rs232 and the
>> > T200's? or could the REX that is in the T200 be causing problems? I
>> > can't see how it could be but i'm grasping at any straws that could be
>> > around.
>> >
>> >
>> > bst rgrds
>> >
>> > Russell
>> >
>> >
