I tried the same, with the same results. I went back to using the BBB plus this <https://www.amazon.com/GL-MT300N-Standard-pre-installed-Repeater-Tethering/dp/B01AL7P1FU/ref=sr_1_1?s=pc&ie=UTF8&qid=1475280536&sr=1-1&keywords=GL-MT300N> .
Should be noted for all you will either need to remove the USB port where the Power port used to be, or use a set of headers to raise the CRAMPS board up as it doesn't clear it. I should get back to figuring out why the BBGW fails in a week or so. On Wednesday, September 28, 2016 at 6:10:09 AM UTC-4, Unai Antero wrote: > > Dear all, > > trying to use a SeeedStudio BeagleBone Green Wireless (+ the CRAMPS > board) to run machinekit, but without much success... > > Tried using the SD image on > https://rcn-ee.com/rootfs/bb.org/testing/2016-09-18/machinekit/bone-debian-8.6-machinekit-armhf-2016-09-18-4gb.img.xz > > , but although it works fine on a Beagle Bone Black, the BB Green Wireless > refuses to boot (seems it doesn't like the 3.8 kernel...). > > On a second attempt, was able to start from a fresh Debian Jessie on the > BeagleBone Green Wireless (that uses the 4.4.9 kernel), installed > the 4.4.9-bone-rt-r10 kernel, and installed machinekit-rt-preempt (apt-get > install from packages at http://deb.machinekit.io/debian) > > Machinekit tries to start the CRAMPS setup, but fails as it expects things > to be in /sys/devices/bone_capemgr.*/slots .... and on this kernel, seems > things are on /sys/devices/platform/bone_capemgr/slots (among other > changes...) > > Has anyone been able to run machinekit on the BeagleBone Green Wireless? > > Thanks > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
