Re: [Machinekit] Re: how to add toolchanger funtion to BBB with Xylotex cape

[schoone...@btinternet.com]

Thanks I have done a PR to put in configs/by_machine/compact5 since it is machine specific https://github.com/machinekit/machinekit/pull/1116 If you want to update it later, that will be the dir in the repo to add to with a PR regards On 10/12/16 01:26, Mike Ross wrote: Thanks - 4 million tool moves plus or minus a few hundred thousand is plenty for me! Attached are the hal, ini and .comp files I have that are working for me.  I've added a bunch of my own comments to them as notes to my future self who won't remember what was done :) The hal and ini are destined to change as I endeavor to add spindle encoder, index pulse and speed control but hopefully that won't be too big a hurdle as it seems to have been done enough times before. Mike -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.