Hi All, I have installed Linuxcnc on my Desktop PC and I'm using two parallels port to control my cnc machine. All seems works as expected except for some disturbs on the pci. Now I want migrate all configuration on the Machinekit installed on my Raspberry pi3 model B. I have installed jessie and preempt_rt kernel and installed Machinekit, all demos are working as expected if I'm testing only the axis with GPIO (I have tested those with LEDs). The next point is to migrate all the remaining hal configurations from linuxcnc to machinekit in order to work using the GPIO but I don't know about the tags for each action that need to be set in hal file.
At this url https://expirebox.com/download/b88a07e8ad3627fbc18a0168657f8f0b.html you can see all asctions that I need to set. In this other url https://expirebox.com/download/fd991c58407e8bb81a92d268f2572a4f.html you can see the standard_pinout.hal file that need to be completed in order to map all actions. Can you help me to complete it in order to have all worked fine? Thanks in advance for your time, any suggestion is very appreciated because I'm stuck here. Regards, Antonio -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
