I did built a new uSD and then did the following: setenv bitimage DE10_Nano_FB_DB25.7I76_7I76_7I76_7I76.rbf setenv fdtfile DE10_Nano_FB_DB25.7I76_7I76_7I76_7I76.dtb (renamed from soc_system.dtb) and the result was that I couldn't boot at all. So I reset the environment to default and started over. I set the ethaddr, hostname, saveenv and tested the boot process and I could boot again. Then I did setenv bitimage DE10_Nano_FB_DB25.7I76_7I76_7I76_7I76.rbf saveenv and could still boot. So the question is do I need to change the fdtfile and if so what with?
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
