I am seeing three errors on the putty console when it starts to load the kernel the first says [failed] Failed to start Load Kernel Modules the second says [failed] Failed to start iSCSI initiator daemon(iscsid) the third says [failed] Failed to start Login to default iSCSI targets
> On May 25, 2018, at 7:11 PM, Charles Steinkuehler <char...@steinkuehler.net> > wrote: > > On 5/25/2018 5:28 PM, Condit Alan wrote: >> >> I am thinking about buying a small LCD monitor say (16” 1366x768). >> So that I can have a monitor on the putty console at the same time >> I am trying to see if the de10-nano is booting into the desktop. >> Right now I can’t easily switch between the x86 linux desktop and >> the de10-nano desktop to see if I am being successful or not. When >> I turn off my development box and try to boot the de10-nano >> desktop I am not seeing anything, the monitor just reports no >> signal. > > I recommend always having a UART serial terminal connected, you will > see a lot of errors you would otherwise miss. And most of the dev > boards (including the DE10) have a Linux console by default on the USB > UART interface. > > -- > Charles Steinkuehler > char...@steinkuehler.net > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the Google > Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/BPRQpoyvFm8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.