On 5/25/2018 5:28 PM, Condit Alan wrote: > > I am thinking about buying a small LCD monitor say (16” 1366x768). > So that I can have a monitor on the putty console at the same time > I am trying to see if the de10-nano is booting into the desktop. > Right now I can’t easily switch between the x86 linux desktop and > the de10-nano desktop to see if I am being successful or not. When > I turn off my development box and try to boot the de10-nano > desktop I am not seeing anything, the monitor just reports no > signal.
I recommend always having a UART serial terminal connected, you will see a lot of errors you would otherwise miss. And most of the dev boards (including the DE10) have a Linux console by default on the USB UART interface. -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
