Hi Tim, I did quick test Stretch + Axis, just turn on without run the milling with default gcode.
a) MachineKit - memory leakage b) LinuxCNC - no leakage Regards, KL Chin On Tuesday, 14 August 2018 00:09:23 UTC+8, KL Chin wrote: > > Hi Tim, > > I tested 2 version. > > a) RealtimePi + MachineKit (ver 0.1) > b) RPi Stretch + LinuxCNC (2.8.1-Pre) > > So far, both no memory leakage. > > Maybe I will try without running the code. > > Regards, > KL chin > > > On Monday, 13 August 2018 21:04:10 UTC+8, Timothy March wrote: >> >> To KL Chin >> I just setup Stretch SDcard again last night and tried it briefly before >> I left for work today. Gcode I am using is Machinekit Splash Goode. I just >> start Axis and open Htop I do not have to run code screen just displaying >> Axis memory usage climbs very slowly. When I found this a wile back it to >> over 36 hours to eat up all available memory. If you shut down Axis memory >> returns to normal >> >> Tim >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
