Schooner, The title to the thread is Xylotex.ini failing to run under Stretch. I showed the output: MACHINEKIT - 0.1 Machine configuration directory is '/home/machinekit/machinekit/configs/ARM.BeagleBone.Xylotex' Machine configuration file is 'Xylotex.ini'
So I don’t know how I was to more clearly tell you what configuration I am working on. Having programmed for years I know better than to use a non-text editor on source code. Alan > On Sep 1, 2018, at 1:13 AM, [email protected] wrote: > > You haven't even said which config you are running, we can't guess that it > was the last, amongst many you have mentioned. > > Please attach YOUR copies of all the hal files and the ini file > (in case you have done something stupid like editing it with microsoft word) > > Open a terminal, run 'sudo > /var/log/linuxcnc.log' then run 'export > DEBUG=5' > Then start machinekit from the same terminal session. > > Then attach the whole resultant linuxcnc.log too. > > If an error mentioning 'segmentation fault' or 'general protection fault' is > displayed, > attach dmsg (run 'dmsg > dmsg.txt') > > I have an inkling as to what this error is, but am not going to speculate. > > > On 31/08/18 23:15, mugginsac wrote: >> It looks like it may be failing on insmod of motmod. >> >> This is the line in the Xylotex.hal file that the message points to: >> loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD >> num_joints=[TRAJ]AXES >> >> -- >> website: http://www.machinekit.io <http://www.machinekit.io/> blog: >> http://blog.machinekit.io <http://blog.machinekit.io/> github: >> https://github.com/machinekit <https://github.com/machinekit> >> --- >> You received this message because you are subscribed to the Google Groups >> "Machinekit" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> Visit this group at https://groups.google.com/group/machinekit >> <https://groups.google.com/group/machinekit>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > website: http://www.machinekit.io <http://www.machinekit.io/> blog: > http://blog.machinekit.io <http://blog.machinekit.io/> github: > https://github.com/machinekit <https://github.com/machinekit> > --- > You received this message because you are subscribed to a topic in the Google > Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/dDVH1TJDFDA/unsubscribe > <https://groups.google.com/d/topic/machinekit/dDVH1TJDFDA/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/machinekit > <https://groups.google.com/group/machinekit>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
