You are not adding any generators (there are already 9 ... 6 actual gens and 3 representing dispatchable load). You are simply providing Q bids for all generators and dispatchable loads.
-- Ray Zimmerman Senior Research Associate 419A Warren Hall, Cornell University, Ithaca, NY 14853 phone: (607) 255-9645 On Feb 13, 2012, at 9:26 AM, Carlos Gonzalez Almeida wrote: > I don't want to add additional generators. If I add 9 rows to genmatrix means > that I have added 9 other generators. > > Best Wishes > > Carlos > > > On Mon, Feb 13, 2012 at 15:22, Ray Zimmerman <[email protected]> wrote: > You need to add the capability curves to the gen matrix (columns PC1 through > QC2MAX, see section 5.4.3 in the User's Manual). Your Q bids also need to > have either zero or 9 rows (see the error message). > > -- > Ray Zimmerman > Senior Research Associate > 419A Warren Hall, Cornell University, Ithaca, NY 14853 > phone: (607) 255-9645 > > > > > On Feb 12, 2012, at 6:52 PM, Carlos Gonzalez Almeida wrote: > >> Dear Dr. Zimmerman, >> >> In the case "'t_auction_case'", I want to have reactive offers and bids as >> well as capability curve limits. What changes I have to apply to the gencost >> and gen matrices? >> I faced with following error when I ran the following code. >> >> clear all; >> mpc = loadcase('t_auction_case'); >> mkt.OPF = 'AC'; >> mkt.auction_type = 0; >> offers.P.qty = [ ... >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24 ]; >> offers.P.prc = [ ... >> 20 50 60; >> 20 40 70; >> 20 42 80; >> 20 44 90; >> 20 46 75; >> 20 48 60 ]; >> bids.P.qty = [ ... >> 10 10 10; >> 10 10 10; >> 10 10 10 ]; >> bids.P.prc = [ ... >> 100 70 60; >> 100 50 20; >> 100 60 50 ]; >> >> %++++++++Reactive bids and offers++++++++ >> offers.Q.qty = [ ... >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24; >> 12 24 24 ]; >> offers.Q.prc = [ ... >> 20 50 60; >> 20 40 70; >> 20 42 80; >> 20 44 90; >> 20 46 75; >> 20 48 60 ]; >> bids.Q.qty = [ ... >> 10 10 10; >> 10 10 10; >> 10 10 10 ]; >> bids.Q.prc = [ ... >> 100 70 60; >> 100 50 20; >> 100 60 50 ]; >> %++++++++++++++++++++++++ >> >> [mpc_out, co, cb, f, dispatch, success, et] = runmarket(mpc, offers, bids, >> mkt); >> >> Error >> ??? Error using ==> off2case>idx_vecs at 459 >> number of reactive power bids must be zero or match the total number of rows >> in gen >> >> Error in ==> off2case at 102 >> [idxPo, idxPb, idxQo, idxQb] = idx_vecs(offers, bids, G, L, haveQ); >> >> Error in ==> smartmkt at 74 >> [gen, genoffer] = off2case(mpc.gen, mpc.gencost, offers, bids, mkt.lim); >> >> Error in ==> runmarket at 141 >> [co, cb, r, dispatch, success] = smartmkt(mpc, offers, bids, mkt, mpopt); >> >> Regards >> >> Carlos >> > >
