the curtailment price which is mentioned in the manual is the price which will be provided extra for the customers for load curtailment.am i think correct or not.if yes the onjective function which will obtain when runopf includes that curtailment price in that
On Tue, Feb 23, 2016 at 9:41 PM, Mounika Vanjarapu < [email protected]> wrote: > whenever the customers are asked they will reduce their load.for reducing > their load they will be provided the bill credit or some extra money like > the price at which customers are curtailing. > > On Tue, Feb 23, 2016 at 8:39 PM, Ray Zimmerman <[email protected]> wrote: > >> I don’t know what you mean by “the incentives”. The results.bus(:, LAM_P) >> computed by MATPOWER includes all components that have been included in the >> objective function, so if the objective function includes “the incentives” >> then lambdas will too. >> >> Ray >> >> On Feb 20, 2016, at 2:14 AM, Mounika Vanjarapu < >> [email protected]> wrote: >> >> sir, >> by changing the load when i run opf then the lmp at the 3rd bus will not >> include the incentives.i want to include that term and i want to calculate >> the lmp value.is it possible to calculate lmp value using matpower or >> any other suggestion. >> >> On Sat, Feb 20, 2016 at 1:56 AM, Ray Zimmerman <[email protected]> wrote: >> >>> I’m not sure if your question is about how to get the prices from >>> MATPOWER results, or about how to formulate your problem. If the former, >>> the prices are in results.bus(:, LAM_P). If it’s the latter, I suggest >>> you take your question to a more appropriate forum. >>> >>> Ray >>> >>> >>> On Feb 19, 2016, at 8:12 AM, Mounika Vanjarapu < >>> [email protected]> wrote: >>> >>> sir >>> my problem is >>> i am taking an ieee standard bus system. >>> based on the reference paper on contingency analysis i take 9-14 line as >>> the most critical outage for 14 bus system. >>> i remove that line and i apply the demand response at 3rd bus which have >>> 94.2MW load. >>> >>> <image.png> >>> taking demand before demand response 94.2MW,elasticity as given -0.1 as >>> given in reference,penalty as zero,assume incentive as 100$/MWh,price taken >>> the lmp value at 3rd bus.i get the load after dr as 84.6. >>> now my question is ,when i include incentives then the price will change >>> at that bus.how to show the price variation >>> >>> >>> >> >> >
