thanq me advincing me sir. On Mon, Feb 15, 2016 at 11:34 PM, Ray Zimmerman <[email protected]> wrote:
> I suggest you read the User’s Manual carefully, especially the sections on > optimal power flow, dispatchable (i.e price sensitive) loads and how to > extend the OPF formulation. I am happy to help you understand MATPOWER’s > capabilities if you have specific questions, but it will be your > responsibility to determine how to use MATPOWER to solve your problem (see FAQ > #2 <http://www.pserc.cornell.edu/matpower/#homework>). > > Ray > > > On Feb 15, 2016, at 12:11 PM, Mounika Vanjarapu < > [email protected]> wrote: > > sir actually my problem is, i have to implement demand response programs > at a particular bus to mitigate congestion.In order to implement that i > require load variations with respect to price and incentives and also > penalties.After that what is the consumers benifit because of these > programs.for these things there are some equations like > <image.png> > <image.png>.how can we link these equations to matpower,by writing in the > matlab.i am getting confused how to proceed my project. > > On Mon, Feb 15, 2016 at 9:51 PM, Ray Zimmerman <[email protected]> wrote: > >> I’m sorry, but I do not understand your questions … in particular what is >> meant by “dumping of equations”. Please state your question carefully and >> precisely and be sure to give enough information so we can understand what >> you are asking. >> >> Ray >> >> >> >> On Feb 14, 2016, at 10:43 AM, Mounika Vanjarapu < >> [email protected]> wrote: >> >> actually i am doing my project on "congestion management using demand >> response".in order to implement that there are lot of equations regarding >> load demand after implementing demand response including price elasticity >> of demand.my sir told that dumping of equations in matlab and doing this >> project in 5 months is somewhat difficult.so i require advice regarding >> this ,can we do without dumping of equations.or i goto other software. >> >> On Sun, Feb 14, 2016 at 8:36 PM, Abhyankar, Shrirang G. <[email protected]> >> wrote: >> >>> Please ALWAYS send the code you were trying to run and the entire error >>> message. >>> >>> Shri >>> >>> On Feb 13, 2016, at 11:16 PM, Mounika Vanjarapu < >>> [email protected]> wrote: >>> >>> when i tried for case9 or case5 ,its getting error.what is the reason >>> >>> On Wed, Feb 10, 2016 at 6:29 PM, Mounika Vanjarapu < >>> [email protected]> wrote: >>> >>>> thanq very much for answering. >>>> >>>> On Wed, Feb 10, 2016 at 3:46 AM, Mirish Thakur <[email protected]> >>>> wrote: >>>> >>>>> Hello Mounika, >>>>> >>>>> If I'm not wrong are you interested in this one - >>>>> mpc=case_ieee30; % load case_ieee30 >>>>> mpc1=load2disp(mpc); % make all loads dispatchable >>>>> r=runopf(mpc1); % perform opf operation on mpc1 casefile. >>>>> You can observe all loads are modeled as negative generators in >>>>> mpc1.gen matrix. >>>>> In r.gen(:,2) field you will see all dispatchable loads. But now I >>>>> can see 283.4 of 283.4 dispatchable loads. I think its because of no >>>>> congestion in network and generation is suffice to meet demand. >>>>> >>>>> Thanks and regards >>>>> Mirish >>>>> >>>>> >>>>> >>>>> On Tue, Feb 9, 2016 at 6:17 PM, Mounika Vanjarapu < >>>>> [email protected]> wrote: >>>>> >>>>>> sir i dont know basics in matpower.i want to know how to write the >>>>>> code for converting fixed loads to dispatchable loads taking a small >>>>>> example.for example an ieee 30 bus taking some are dispatchable. >>>>>> >>>>> >>>>> >>>> >>> >> >> > >
