Hi Sandeep
 
If my guess is correct you have two different hostnames for your admin
and engage nodes? If so then try doing the following in
config.properties:
Change org.opencastproject.server.url to be your engage server ie:
engage.tamu-commerce.edu/
Change org.opencastproject.admin.ui.url to be your main administration
node (the one that handles ingestion,etc..) server
Change org.opencastproject.engage.ui.url to
${org.opencastproject.server.url}
Now that's done fire up the servers and that will get rid of the
exception:
 
org.opencastproject.search.api.SearchException: Unable to add
mediapackage cacd4c2c-e2f9-4025-9c0f-cc587d7f465c using the remote
search services

Upload a small file to test if the workflow processes as expected and
that there are no more exceptions being logged. if the workflow finishes
as expected then do the section below, otherwise let us know.
 
This section addresses why the HTML of the engage page(s) does not
change to reflect the server URL changes.
 
you see, Matterhorn uses the SOLR search tool to index and link the
thumbnails, videos to their recording id when you try to play them. Now
this is a static index that does not dynamically change with the
configuration URL unless the media being indexed is new. AKAIK this
means you cannot edit the URLs manually you would have to use the rest
endpoint for this of simply re-encode all the files after the new URL
has been tested and works. Perhaps someone with more experience in the
community can help on how this can be done.
 
I hope this helps
 
 
 
--
Lovemore Nalube
OLE Developer (Vula)
University of Cape Town
http://www.cet.uct.ac.za/LovemoreN

>>> On 3/17/2011 at 5:37 PM, in message
<[email protected]>, Sandeep Tamrakar
<[email protected]> wrote:

Hello,

I checked my config.properties, and yes server.url was set to
10.19.0.208:8080, I changed it to engage.tamu-commerce.edu. 
However, it gave me an during the processing. It says, 

org.opencastproject.search.api.SearchException: Unable to add
mediapackage cacd4c2c-e2f9-4025-9c0f-cc587d7f465c using the remote
search services

What might have caused the problem?

Regards,
Sandeep Tamrakar
A&M - Commerce

From: [email protected]
Date: Wed, 16 Mar 2011 21:45:35 +0100
To: [email protected]
Subject: Re: [Matterhorn-users] The media module is not accessible from
the outside network!

Sandeep,

if you take a look at /conf/config.properties, you'll find a bunch of
*.url settings in there. On your case, you want to adjust the
download.url to match something that is reachable from the outside. If
it's not set explicitly, the server.url is used, which currently is most
probably set to 10.19.0.208:8080. The download.url will be added as a
prefix to your distributed media.

Tobias

On 16.03.2011, at 20:09, Sandeep Tamrakar wrote:

Hello,



I have been trying to find the way to make the media module accessible
from the network outside the school. I am finding it hard to figure out

what is causing this problem. If I get inside the media module from the
school network, everything looks just fine; thumbnails are properly 
displayed and videos runs fine too. But its not the same case if I get
out of the school network. I cannot the see the thumbnails and videos
dont
load up. 
Here is the source code I retrieved from the media module page. On the
address, instead of IP address, there was suppose to be
"engage.tamu-commerce.edu/"


<img class="thumb"
src="http://10.19.0.208:8080/static/776feb43-5ecd-407a-ad2e-9545d15ad7d8/attachment-3/BT878_video__ProVideo_PV143_.jpg";>


what setting should I change so that i can get access to media files
from network outside the school??


Sandeep Tamrakar
A&M - Commerce
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users



_______________________________________________ Matterhorn-users
mailing list [email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users 


 

###
UNIVERSITY OF CAPE TOWN 

This e-mail is subject to the UCT ICT policies and e-mail disclaimer
published on our website at
http://www.uct.ac.za/about/policies/emaildisclaimer/ or obtainable from
+27 21 650 9111. This e-mail is intended only for the person(s) to whom
it is addressed. If the e-mail has reached you in error, please notify
the author. If you are not the intended recipient of the e-mail you may
not use, disclose, copy, redirect or print the content. If this e-mail
is not related to the business of UCT it is sent by the sender in the
sender's individual capacity.

###
 
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users

Reply via email to