This was working yesterday, I have been creating new VM’s with several different options still no dice???
Here is the configuration I had working LSI Logic SAS SCSI (recommended) Create New Virtual Disk Store Virtual Disk as Single File David thank you for the suggestion, at moment I won’t be able to do that? Any other suggestions anyone? From: [email protected] [mailto:[email protected]] On Behalf Of David van Beek Sent: Saturday, August 23, 2014 10:39 AM To: [email protected] Subject: Re: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 Try using diskpart manually with F8 in WinPe, create and pre-formatted drive. This happend to before, after the diskpart is was ok. The TS-engine could store any data, after the format it could. Hopefully this helps. Sent from my iPhone Mvg, David van Beek KPN Consulting On 23 aug. 2014, at 16:31, Daniel Ratliff <[email protected]<mailto:[email protected]>> wrote: Not sure, but worst case just go back into the settings and delete and recreate the HDD. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: Saturday, August 23, 2014 10:28 AM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 Forgive me I am little frayed at the moment, when I create the VM is there an option for that? From: [email protected]<mailto:[email protected]> [mailto:[email protected]]<mailto:[mailto:[email protected]]> On Behalf Of Daniel Ratliff Sent: Saturday, August 23, 2014 10:18 AM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 No, your disk configuration on your VM. Make sure you are using ‘thick provisioned’, I think that is what VMware calls it. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: Saturday, August 23, 2014 10:15 AM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 I have a slave installed on my machine that is fixed D: drive, that is where I am running it from. From: [email protected]<mailto:[email protected]> [mailto:[email protected]]<mailto:[mailto:[email protected]]> On Behalf Of Daniel Ratliff Sent: Saturday, August 23, 2014 10:00 AM To: '[email protected]<mailto:[email protected]>'; '[email protected]<mailto:[email protected]>' Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 Are you using a fixed disk or dynamic? I have had similar issues in the past with dynamic disks. -----Original Message----- From: Denzik, Josh [[email protected]<mailto:[email protected]>] Sent: Saturday, August 23, 2014 09:24 AM Eastern Standard Time To: [email protected]<mailto:[email protected]> Subject: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware Workstation 10 All, I setup my new deployment share, created my client task sequence. I am using VM Ware Workstation 10. HD settings are SCSI. With 40 GB Drive. I am trying to apply win 7 x64. This was working on a previous deployment I had setup, but I had to create a new deployment share and new task sequences. Are there any settings for VM Ware Workstation 10 I should be aware of? Any Drivers I am missing? Any obvious settings in the ts I need to check? I am using WinPE 5.0. Please help I am very frustrated…Any help would be greatly appreciated. ☺ Below is a snippet from the log. <image001.png> The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
