>> David thank you for the suggestion, at moment I won’t be able to do that? >> Any other suggestions anyone? - what can you try at the moment? And try it. - go back to your notes and simulate your yesterday environment.
we don't know the changes you made to your environment therefore, can't really help you on that but f8 and diskpart is great suggestion to start troubleshooting. No disk no saving. Cesar A. Meaning is NOT in words, but inside people! Dr. Myles Munroe My iPad takes half the blame for misspells. > On Aug 23, 2014, at 7:47 AM, "Denzik, Josh" <[email protected]> wrote: > > This was working yesterday, I have been creating new VM’s with several > different options still no dice??? > > Here is the configuration I had working > > LSI Logic SAS > SCSI (recommended) > Create New Virtual Disk > Store Virtual Disk as Single File > > David thank you for the suggestion, at moment I won’t be able to do that? Any > other suggestions anyone? > > > From: [email protected] [mailto:[email protected]] > On Behalf Of David van Beek > Sent: Saturday, August 23, 2014 10:39 AM > To: [email protected] > Subject: Re: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM > Ware Workstation 10 > > Try using diskpart manually with F8 in WinPe, create and pre-formatted drive. > > This happend to before, after the diskpart is was ok. The TS-engine could > store any data, after the format it could. > > Hopefully this helps. > > Sent from my iPhone > > Mvg, > > David van Beek > KPN Consulting > > On 23 aug. 2014, at 16:31, Daniel Ratliff <[email protected]> wrote: > > Not sure, but worst case just go back into the settings and delete and > recreate the HDD. > > From: [email protected] [mailto:[email protected]] > On Behalf Of Denzik, Josh > Sent: Saturday, August 23, 2014 10:28 AM > To: [email protected] > Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM > Ware Workstation 10 > > Forgive me I am little frayed at the moment, when I create the VM is there an > option for that? > > From: [email protected] [mailto:[email protected]] > On Behalf Of Daniel Ratliff > Sent: Saturday, August 23, 2014 10:18 AM > To: [email protected] > Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM > Ware Workstation 10 > > No, your disk configuration on your VM. Make sure you are using ‘thick > provisioned’, I think that is what VMware calls it. > > From: [email protected] [mailto:[email protected]] > On Behalf Of Denzik, Josh > Sent: Saturday, August 23, 2014 10:15 AM > To: [email protected] > Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM > Ware Workstation 10 > > I have a slave installed on my machine that is fixed D: drive, that is where > I am running it from. > > From: [email protected] [mailto:[email protected]] > On Behalf Of Daniel Ratliff > Sent: Saturday, August 23, 2014 10:00 AM > To: '[email protected]'; '[email protected]' > Subject: RE: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM > Ware Workstation 10 > > Are you using a fixed disk or dynamic? > > I have had similar issues in the past with dynamic disks. > > -----Original Message----- > From: Denzik, Josh [[email protected]] > Sent: Saturday, August 23, 2014 09:24 AM Eastern Standard Time > To: [email protected] > Subject: [MDT-OSD] MDT 2013 Task Sequence Failing After Apply OS on VM Ware > Workstation 10 > > > All, > > I setup my new deployment share, created my client task sequence. I am using > VM Ware Workstation 10. HD settings are SCSI. With 40 GB Drive. I am trying > to apply win 7 x64. This was working on a previous deployment I had setup, > but I had to create a new deployment share and new task sequences. Are there > any settings for VM Ware Workstation 10 I should be aware of? Any Drivers I > am missing? Any obvious settings in the ts I need to check? I am using WinPE > 5.0. Please help I am very frustrated…Any help would be greatly appreciated. > J Below is a snippet from the log. > > <image001.png> > > The information transmitted is intended only for the person or entity to > which it is addressed > and may contain CONFIDENTIAL material. If you receive this > material/information in error, > please contact the sender and delete or destroy the material/information. > > The information transmitted is intended only for the person or entity to > which it is addressed > and may contain CONFIDENTIAL material. If you receive this > material/information in error, > please contact the sender and delete or destroy the material/information. > > The information transmitted is intended only for the person or entity to > which it is addressed > and may contain CONFIDENTIAL material. If you receive this > material/information in error, > please contact the sender and delete or destroy the material/information.
