Hi: I hit the simiar issue(booted, while no X) as vijay singh, when I want to run MeeGo on top of devkit8000.
I followed <Steps to modify an N900 image for BeagleBoard > at http://wiki.meego.com/ARM/Meego_on_the_Beagle, using http://repo.meego.com/MeeGo/releases/1.0/core/images/meego-n900-open-armv7l/meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw.bz2 and http://wiki.meego.com/images/Meego-beagle-kernel.tar.bz2 My u-boot cmd is: setenv bootcmd 'mmcinit; fatload mmc 0 0x82000000 uImage;bootm 0x82000000' setenv bootargs 'mem=256M console=ttyS2,115200n8 mpurate=600 buddy=unknown vram=12M omapfb.mode=dvi:1024x768mr...@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait' boot MeeGo can boot into shell in serial cmd prompt. while I found the external monitor (connected via HDMI=>DVI) is black after a blinking. Boot information(boot-log) is attached. I also tried startx from serial cmd shell, I know it is not reasonable to start x from this shell, while the attached debug information(startx) might be useful. Appreciate guide on how to process to start X on my devkit8000. Samuel
boot-log
Description: Binary data
startx
Description: Binary data
_______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
