Hi Amit, Can you tell me how to "build the fresh SGX modules for Devkit8000 kernel and install them in your Rootfs along with the libraries." I know my questions may sound stupid, but i'm really known nothing about this.
And I found a problem may cause the issue there is no ui in my beagleboard: I checked out the 2.6-stable, in the patch/sgx folder, there are some patches about sgx 3.0.1-6 but no 4.0.. Is that why i failed to show the ui? About kernel 2.6.35-devel, I found some patches about devkit8000, is that means if i use 2.6.35-devel, i don't need to use devkit8000 source code to build the kernel? So may i need to do some thing special against the build_kernel.sh to make those patches work(devkit8000 and sgx)? Thanks in advance! Chen 2010/9/17 Amit Pundir <[email protected]> > > On Fri, Sep 17, 2010 at 6:37 AM, Samuel Xu <[email protected]> wrote: > > Thanks Amit Pundir! > > Does it mean I should not follow > > http://wiki.meego.com/ARM/Meego_on_the_Beagle, and should follow > > http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch? I guess > > I can't comment on that since I didn't try > http://wiki.meego.com/ARM/Meego_on_the_Beagle > > > Meego_on_Beagleboard_from_scratch page is guide us to self-build a > > kernel > > and rootfs, instead of quick installing a pre-compiled one for N900. > > > > It will be better for you to go from scratch since you won't be able > to get the UI up on Devkit8000 with the pre-built images available for > BeagleBoard from here http://wiki.meego.com/ARM/Meego_on_the_Beagle > because SGX(OpenGL ES) will not take off out of the box. > > In case you have to go with the pre-built images, you need to remove > the previous SGX installation(modules + init script + libraries) and > build the fresh SGX modules for Devkit8000 kernel and install them in > your Rootfs along with the libraries. > > Regards, > Amit Pundir > > > Is my understanding correctly? > > > > Samuel > > > > 2010/9/16 Amit Pundir <[email protected]>: > >> On Thu, Sep 16, 2010 at 3:35 PM, Samuel Xu <[email protected]> > >> wrote: > >>> Hi: > >>> I hit the simiar issue(booted, while no X) as vijay singh, when I want > >>> to run MeeGo on top of devkit8000. > >>> > >>> I followed <Steps to modify an N900 image for BeagleBoard > at > >>> http://wiki.meego.com/ARM/Meego_on_the_Beagle, using > >>> http://repo.meego.com/MeeGo/releases/1.0/core/images/meego-n900-open-armv7l/meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw.bz2 > >>> and http://wiki.meego.com/images/Meego-beagle-kernel.tar.bz2 > >>> > >>> My u-boot cmd is: > >>> setenv bootcmd 'mmcinit; fatload mmc 0 0x82000000 uImage;bootm 0x82000000' > >>> setenv bootargs 'mem=256M console=ttyS2,115200n8 mpurate=600 > >>> buddy=unknown vram=12M omapfb.mode=dvi:1024x768mr...@60 > >>> omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait' > >>> boot > >>> > >> > >> Hi, I got it running few weeks back by following the instructions from > >> here http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch > >> > >> I hope things will work out fine for you as well. > >> > >>> MeeGo can boot into shell in serial cmd prompt. while I found the > >>> external monitor (connected via HDMI=>DVI) is black after a blinking. > >>> > >>> Boot information(boot-log) is attached. I also tried startx from > >>> serial cmd shell, I know it is not reasonable to start x from this > >>> shell, while the attached debug information(startx) might be useful. > >>> > >>> Appreciate guide on how to process to start X on my devkit8000. > >>> > >> > >> If you do exactly the same as mentioned in that wiki page, you will > >> land safely :) because I made some mistakes while copying the rootfs > >> to MMC card and that gave a set of permission errors. Due to which my > >> UI was not coming up. > >> > >> Make sure you are copying the rootfs onto the card as mentioned in the > >> wiki to retain the same set of permissions/privileges as needed. > >> > >> Regards, > >> Amit Pundir > >> > >>> Samuel > >>> > >> > > > _______________________________________________ > MeeGo-dev mailing list > [email protected] > http://lists.meego.com/listinfo/meego-dev _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
