Thanks Amit Pundir! Does it mean I should not follow http://wiki.meego.com/ARM/Meego_on_the_Beagle, and should follow http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch? I guess Meego_on_Beagleboard_from_scratch page is guide us to self-build a kernel and rootfs, instead of quick installing a pre-compiled one for N900.
Is my understanding correctly? Samuel 2010/9/16 Amit Pundir <[email protected]>: > On Thu, Sep 16, 2010 at 3:35 PM, Samuel Xu <[email protected]> wrote: >> Hi: >> I hit the simiar issue(booted, while no X) as vijay singh, when I want >> to run MeeGo on top of devkit8000. >> >> I followed <Steps to modify an N900 image for BeagleBoard > at >> http://wiki.meego.com/ARM/Meego_on_the_Beagle, using >> http://repo.meego.com/MeeGo/releases/1.0/core/images/meego-n900-open-armv7l/meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw.bz2 >> and http://wiki.meego.com/images/Meego-beagle-kernel.tar.bz2 >> >> My u-boot cmd is: >> setenv bootcmd 'mmcinit; fatload mmc 0 0x82000000 uImage;bootm 0x82000000' >> setenv bootargs 'mem=256M console=ttyS2,115200n8 mpurate=600 >> buddy=unknown vram=12M omapfb.mode=dvi:1024x768mr...@60 >> omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait' >> boot >> > > Hi, I got it running few weeks back by following the instructions from > here http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch > > I hope things will work out fine for you as well. > >> MeeGo can boot into shell in serial cmd prompt. while I found the >> external monitor (connected via HDMI=>DVI) is black after a blinking. >> >> Boot information(boot-log) is attached. I also tried startx from >> serial cmd shell, I know it is not reasonable to start x from this >> shell, while the attached debug information(startx) might be useful. >> >> Appreciate guide on how to process to start X on my devkit8000. >> > > If you do exactly the same as mentioned in that wiki page, you will > land safely :) because I made some mistakes while copying the rootfs > to MMC card and that gave a set of permission errors. Due to which my > UI was not coming up. > > Make sure you are copying the rootfs onto the card as mentioned in the > wiki to retain the same set of permissions/privileges as needed. > > Regards, > Amit Pundir > >> Samuel >> > _______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
