g`day,
the Z uses the same as the L dont it? 20teeth 180degree so i guess 1 tooth
is 9degree, correct?
Paddy
>From: Adam Rowe <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Re: Z18ET cam timing
>Date: Sat, 13 May 2000 00:58:49 +1000
>
>So you are saying that you have advanced the cam by one tooth and that has
>fixed
>most of your unhappy performance problems?
>
>Peter and Trace wrote:
>
> > Hi all,
> > I just checked and adjusted my tappetts HOT. I noticed also
>that the
> > overlap on no.4 was a bit lagging with no. 1 on TDC. I advanced the cam
> > one tooth (rotated clockwise from the front) and boy did it make a big,
>and
> > good difference. Heaps more responsive down low and hence comes on
>boost
> > faster. In all that excitement I forgot to listem for the noisy tappet,
> > the original job!!
> > How many degrees is one tooth?
> > Regards,
> > Pete.
>
>--
>Adam
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
