what was the engine doing before you changed the cam timing?
what do u guyz do for dist cap and rotors when they wear out
how much boost can you run with a standard motor and no intercooler?
what sort of return line from the turbo into the sump do u use?
any tricks that i can learn to increase preformence or anything
>From: Terry & Heather <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Re: Z18ET cam timing
>Date: Sat, 13 May 2000 22:44:06 +1000
>
>Paddy,
>
>Do'h, yes it has 40 teeth sorry about the error, i should have checked the
>book
>with something as important as that and yes exactly 9 degrees is correct
>(360/40)
>
>regards,
>Terry
>
>Paddy Mcmillan wrote:
>
> > g`day,
> > mines got 40 i just counted again to make sure.)
> > is 9 degree rite tho?? i hope so
> > ive totally confused myself!!
> > Paddy
> >
> > >From: Terry & Heather <[EMAIL PROTECTED]>
> > >Reply-To: [EMAIL PROTECTED]
> > >To: [EMAIL PROTECTED]
> > >Subject: Re: Z18ET cam timing
> > >Date: Sat, 13 May 2000 20:19:25 +1000
> > >
> > >An L series cam sprocket has 41 teeth so 1 tooth = 8.8 degrees.
> > >
> > >terry
> > >
> > >Paddy Mcmillan wrote:
> > >
> > > > g`day,
> > > > the Z uses the same as the L dont it? 20teeth 180degree so i guess 1
> > >tooth
> > > > is 9degree, correct?
> > > > Paddy
> > > > >
> > > > >So you are saying that you have advanced the cam by one tooth and
>that
> > >has
> > > > >fixed
> > > > >most of your unhappy performance problems?
> > > > >
> > > > >Peter and Trace wrote:
> > > > >
> > > > > > Hi all,
> > > > > > I just checked and adjusted my tappetts HOT. I noticed
>also
> > > > >that the
> > > > > > overlap on no.4 was a bit lagging with no. 1 on TDC. I advanced
>the
> > >cam
> > > > > > one tooth (rotated clockwise from the front) and boy did it make
>a
> > >big,
> > > > >and
> > > > > > good difference. Heaps more responsive down low and hence comes
>on
> > > > >boost
> > > > > > faster. In all that excitement I forgot to listem for the noisy
> > >tappet,
> > > > > > the original job!!
> > > > > > How many degrees is one tooth?
> > > > > > Regards,
> > > > > > Pete.
> > > > >
> > > > >--
> > > > >Adam
> >
> > ________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> >
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
