Alb's,
If you are refering to the black metal domed plates that have three holes
drilled in the top of the dome. They side over the studs on the top of the
strut with the dome up and the lip down. Then stick the struts in the car ie
they go on the strut top, but sandwiched between the body and strut.
But
>> then i got thinking do they fit under the body of the car straight on top
>> of the strut top
Yes
or do they go on the outside of the body,
No
if so do they
>> fit into a 1600 (
Yes
Also you may need have a bit of a file in the body where the studs go
through. I have heard thet the distance between studs is slightly different.
Can anyone on the list confirm this?
Cya
Trev
Date: Sun, 23 May 1999 21:41:54 +0800
From: Albs <[EMAIL PROTECTED]>
----------------------------------------
they would be the the top cover, but intead of been the push in platic type
on the 510 they are held in place with the with the strut studs and are
made of metal.
>Albs,
>I'd like to help but I can't figure what plates you're referring to - may
be
>the mounting insulators (3 studs sticking up and a bearing in the middle)
or
>some other bit. The only other part that is like what you describe is the
top
>cover that don't fit the hole in the 510 struts tower - you'll have to use
>the original plastic ones.
>
>regards
>Terry
>
>Albs wrote:
>
>> I've just brought a pair of 240k struts which came with two covers (metal
>> dished shaped plates, with a lip on the edge) I was told i need to fit
>> those so i've sent them to the chromers, but they wan't to know which way
>> the go around i would assume they sit with the dished part dished up. But
>> then i got thinking do they fit under the body of the car straight on top
>> of the strut top or do they go on the outside of the body, if so do they
>> fit into a 1600 (i've already ground down the ridge on the body around
>> where the stut goes prier to painting the car) cause i need to know by
>> tonight so they can get done before the weekend
>> thanks heaps....
>>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
