Terry, is the 240k PCD larger or smaller.(pitch circle diameter) and by how much, approx?
I won't cut my springs. Will make adjustable coil overs. Pete. ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 25, 2002 9:48 PM Subject: RE: 240k strut tops > Pete, > > 240K tops are around 10mm (7/16") lower than 1600 tops but the bolt pattern > is a tad different - no drama if you don't mind (I don't have a problem with > it, it's legal in most places) elongating your tower strut retaining holes. > > Your springs are not captive now and you want to lower them more? Seriously, > don't do it, go and buy some captive springs to suite your struts at the > spring rate you desire (stiff is 175#, racing is 200+#) and the height you > desire. Springs that are not captive are dangerous - that's why they are > banned on the street, and even from most forms of motor sports. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, 25 November 2002 4:19 PM > To: [EMAIL PROTECTED] > Subject: 240k strut tops > > > > Hi all, > is it true that 240k strut tops have a 1/2 inch lowering advantage over > 200b/1600 > tops??? > I need to lower my front end by about 30-40mm however I don't need spring > compressors to remove my spring now. What will happen if I cut them down > even > further? > > Pete. > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
