Dear Feral One that is one I havnt done A10 to B310 did you use Stanza diff
and what tailshaft did you use .One of us will have to visit the other and as
I'm down by the sea and your in the snow weeeeeeeeelllllllllllllllll
Peter
Errol Smith wrote:
> David,
> If you want to use the 120Y on the road, you will need to get an engineers
> report on this conversion. You do not need to use any adaptor if the
> gearbox you are using is normally suited to the engine. As to modifying
> engine mounts and gear box cross-member, any competent engineering shop
> would be able to make these up for you although it may involve paying them
> to come to look at the car to take measurements or delivering the car to
> them to do the work. The stanza clutch would be suitable. I just completed
> putting all stanza running gear suspension included into a Sunny coupe and
> it works very well. The 120Y should be similar.
> Cheers,
> Feral Errol
>
> ----------
> From: David Costello <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: L series into 120Y
> Date: Wednesday, May 31, 2000 9:31
>
> probably a stupid question but do I need mod plates?
> if so would I be better getting an engine conversion place to do it for me
> since I've had no experience modifying engine mounts and gearbox
> crossmember
>
> also the engine is coming out of a stanza so can I just use the hydraulic
> clutch from that?
>
> -----Original Message-----
> From: Errol Smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Wednesday, 31 May 2000 7:35
> Subject: Re: L series into 120Y
>
> >David,
> >You need to put in a hydraulic clutch master cylinder, modify engine
> mounts
> >and gearbox cross member, use a larger radiator, and use a shortened
> >tailshaft. Sounds complicated but not too hard!
> >Cheers
> >Feral Errol
> >----------
> >From: David Costello <[EMAIL PROTECTED]>
> >To: Online Datsun Club <[EMAIL PROTECTED]>
> >Subject: L series into 120Y
> >Date: Wednesday, May 31, 2000 4:48
> >
> >can anyone tell me how difficult it will be to put an L series engine into
> >a 120Y
> >I want to put my old worked L16 with 5 speed stanza box into my brothers
> >120Y
> >but if it's gunna be too much effort he doesn't want me to stuff around
> >with it
> >
> >any thought's/suggestions would be much appretiated
> >
> >
> >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
