thanks Derek, shall look into it. what does a 68/69 x-member go for?
bumpsteer spacers sound cheaper...
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Derek Franklin
Sent: Wednesday, 14 June 2000 8:44 AM
To: [EMAIL PROTECTED]
Subject: Re: Suspension (longish)
Zac,
wouldn't be surprised if both are true - the car's been lowered without
correcting
the geometry at both ends. Probably some toe-out at the rear causing the
unstable
feel, and the front wandering under brakes sounds like bumpsteer or
something
loose in the front end. Slot rear x-member and fit 68/69 front x-member,
maybe
bumpsteer spacers, might want to see about abjustable t/c rods and something
to tune the front camber as well.
DF
>its too low that why. You need bump steer spacers
>> >
>> >Zac,
>> >I think you might be experiencing the back end wanting to steer itself
>due
>> >to toe in or out & too much negative camber at the back caused by the
>> >lowering.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
