List,
just wondering what a 68/69 x-member will do to help....... what is
the difference between this and other x-members??
thanks Andrew
> thanks Derek, shall look into it. what does a 68/69 x-member go for?
> bumpsteer spacers sound cheaper...
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Derek Franklin
> Sent: Wednesday, 14 June 2000 8:44 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Suspension (longish)
>
>
> Zac,
>
> wouldn't be surprised if both are true - the car's been lowered without
> correcting
> the geometry at both ends. Probably some toe-out at the rear causing the
> unstable
> feel, and the front wandering under brakes sounds like bumpsteer or
> something
> loose in the front end. Slot rear x-member and fit 68/69 front x-member,
> maybe
> bumpsteer spacers, might want to see about abjustable t/c rods and something
> to tune the front camber as well.
>
> DF
>
> >its too low that why. You need bump steer spacers
>
> >> >
> >> >Zac,
> >> >I think you might be experiencing the back end wanting to steer itself
> >due
> >> >to toe in or out & too much negative camber at the back caused by the
> >> >lowering.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
