I bought the wrong pads aswell :)
I checked out the calipers today at the u-pull. pulled the calipers off one and bolted them onto another 200b strut :) gotta love the u-pull!!
 
can you remember which one was which caliper? I think I have the pads for the one with the larger pad area, so I will most likely use them. all the calipers at the u-pull were rusted and pretty shagged so I didn't buy them.
 
also, how much difference would 9mm in disc diameter make? much, if any?
 
thanks chris,
zac
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris
Sent: Friday, 7 July 2000 11:19 AM
To: [EMAIL PROTECTED]
Subject: Re: 200B experts!

I'm not sure about height but i would asume there are the same. I have seen two different types of calipers.
There are both very similar but differ in the caliper material and the brake pad. Both are single piston sliding calipers. One has a cast iron/steel slide and alloy body. The other has a full alloy make up (slide and body), but aint much lighter. The pad design changes slightly. Yes I have changed the calipers between struts and it worked for me, only did it cause i bought the wrong pads by accident and had two sets of struts. Didn't measure offset though...
 
chris
----- Original Message -----
Sent: Friday, July 07, 2000 10:02 AM
Subject: 200B experts!

200B experts, can you tell me if all the struts throughout the three year change models are all the same?
 
And more importantly, are the brake calipers interchangeable without offset being an issue?
 
Thanks in advance,
 
zac

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to