Terry & Heather wrote:
> Ash,
>
> 180B (610) belts aren't much good for a 510 as they use a B pillar mounting.
> I've seen it done before but I don't recommend it. Another inertia reel belt
> I've seen used is off the 200B wagon with the end of the belt mounted to the
> roof mounting point (instead of back to the floor) on the 510 with the B
> pillar mounting as a belt guide. This means the B pillar would still take
> some force in an accident so for that reason I still don't like this method.
>
> In my opinion the safest and most comfortable inertia belt conversions for a
> 510 are off the 2 door 200BSX or SSS, Mitsui Scorpion, 240KGT, Skyline 2
> door, (Z's are no good - crude mounting), some Corolla hatchbacks. These
> belts feed through a hanger that attaches to the roof mounting point and
> then return to the floor ie they don't use a B pillar point which is perfect
> for the 510.
The 180B SSS 2 door has this type of belts too.
>
>
> regards,
> terry
--
Adam Rowe
<[EMAIL PROTECTED]>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
