RE: 1600 rear brake cylinders

[Terry & Heather]

Hi Mick, Comments under your questions below.   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mick Ralph Sent: Saturday, 12 August 2000 6:06 PM To: [EMAIL PROTECTED] Subject: 1600 rear brake cylinders   List (and Terry)   Once again I want to ask a question that has been covered here many times. SOB!!    Not for a while though, so you're forgiven (:-   What size rear wheel cylinders should u run for improved braking on the 1600 rear drums?  What model do they come from?    The preferred rwc for 1600 drums are from the 1200 Coupe 11/16" or 17.46mm, make sure they don't sell you 1200 sedan cylinders as these are the same size as 1600's. The smaller cylinders may be standard for the late model 1200 ute with front discs. These will alter the bias slightly to the front and avoid rear lockup with a harder front pad fitted. The standard 1600 rwc is 13/16" or 20.64mm.    Do new cylinders come with adjustors? (the old ones are stuffed!!)    No, you will get adjusters from a 180B.      regards   Terry   Thanks in advance cheers Mick   --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------