A hacksaw....
Andrew S
Diarmuid Tyson wrote:
>
> I have a lead on a new Subaru ignition switch to replace my tired old datto
> one - thing is, as I can't get the old one out to take along with me to
> ensure I'm getting the correct part - (plus I'll have to remove it to
> install the new one.)
> Two bolts are allen key type, with the hexagonal hole filled up with what
> seems to be some sort of metal. I've tried tapping in a very fine bladed
> screwdriver but the metal is too strong. Other ideas i've had are to epoxy
> a small nut to the end of the bolt, or use the Dremel to try and grind the
> metal out of the hole. Otherwise I can't really see a way of removing the
> steering lock/ingition switch without seriously damaging it.
> Can somebody tell me what I should be doing before I ruin what I've got?
> Thanks,
> Diarmuid.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
