Michael,
Very easy conversion.
Reverse rear cross member and use Stanza rear mount. You may have to drill
holes but not on all x-members.
Fit 19 mm spacers between x-member and body, leave rubber insulators on
x-member. Check that 19 mm is enough as some Stanza dogleg boxes have a
longish reverse light switch which will fowl the tunnel. Two ways to go
here, remove and plug the switch or fit the shorter switch from a 1200 etc.
You will need longer high tensile bolts.
Bend gearstick back an inch or so very close to the bottom or cut an inch
out of the tunnel.
Use a matched clutch type and throw out assembly (I prefer to use what comes
with the gearbox as it will always work, well nearly always)
that's about it - pretty easy.
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Michael
Cassidy
Sent: Saturday, 4 November 2000 6:01 PM
To: [EMAIL PROTECTED]
Subject: Stanza 5 speed
What is envolved in fitting up a Stanza (dogleg) 5 speed? I know the
cross member need to be modified and thats about it? Does anyone know
where i can buy a alreaded moded xmember and how much they go for?
thanx
Michael
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
