When I fitted a dogleg into my 510 all I did was re-position the crossmember
on the other set of threaded holes already present. (might have turned it
round...can't remember now) and put some 1/4 inch spacers between the
crossmember and the floor. The tailshaft fitted straight on. The reverse
light switch fouled the tunnel if I remember correctly. I could have got in
there with a big adjuster and set to on the body but instead I cut a hole
and put a rubber bung in it that cleared the switch.
Eddie
England
510, KP710, B10, KB110,
B110, B120, J710, H230,
G620, P330, SRL311, C30,
VBF10, E10, S12
[EMAIL PROTECTED]
pics at www.ratdat.com
> What is envolved in fitting up a Stanza (dogleg) 5 speed? I know the
> cross member need to be modified and thats about it? Does anyone know
> where i can buy a alreaded moded xmember and how much they go for?
>
> thanx
>
> Michael
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
