Hey Davo, at your shop do you sell bits and pieces separate ? At the moment
my FJ exhaust is a 2.5 " all the way from stock dump pipe back. I want to
increase the diameter to 3" from the dump pipe to the cat, then continue the
existing 2.5" system.
So I'm in need of a 3 bolt flange to suit an FJ dump pipe, with a 3 " hole.
That will go to a tight 90 degree bend, then via a short section of pipe to
a 3" to 2.5 reducer to my cat. I can do the tinkering myself.
Cheers, Wardy
----- Original Message -----
From: "Davidson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 27, 2000 8:27 PM
Subject: Re: Pic's of brakes
> OK. There up on the web now. www.angelfire.com/sd/hot1200s/tech/struts
>
> The pics are there except my webpage is pretty dodgy at the moment. In
fact
> it doesnt work but its under construction. If the link doesnt work just
> tell us and i will fix it.
>
> I'll give u the details of the conversion to add to your page.
>
> Struts are from a c210 Skyline. Disc's are Honda 10" vented. Calipers
are
> Toyota Landcruiser - late 70's model i think. Used Datsun
180b/200b/stanza
> bearings. The spring cups had to be cut off with a hacksaw and ground
back
> with a grinder. I used some old stanza struts and carefully cut the
struts
> in half to use stanza spring cups which are alot smaller but the same size
> as the 1200 strut tops.(may be different for the 1600s???) As u can see
in
> the photos the new cups are just loose on the strut waiting to be welded.
> The only reason i hadnt welded them is because i needed to fit up wheels
and
> tyres to make sure nothing was going to foul. I got some front wheel
drive
> offset nissan pulsar rims which looks like the were made for this setup.
> All clearences are within 1cm!! Perfect. The rims are 14x6 with 195/55
> Falken rubber. I will use stanza lower control arms, stanza lower ball
> joints with the stanza steering arm which bolts straight up to the c210
> strut. Umm. I think thats all?
>
> Hopefully this setup will stop and turn my 1200 on a dime :)
>
> Scott
> Davo
>
> -----Original Message-----
> From: Davidson <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Monday, 27 November, 2000 19:11
> Subject: Re: Pic's of brakes
>
>
> >yeah sure. I was going to scan them and put them on a page but yeah u
can
> >put em on the DattoParts website :) I'll give u a yell when there up
> >
> >Scott
> >
> >-----Original Message-----
> >From: Paul W. J. Stanley <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> >Date: Sunday, 26 November, 2000 20:37
> >Subject: Re: Pic's of brakes
> >
> >
> >>can I add them to the DattoParts website?
> >>
> >>
> >>
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
