Terry, I know it's a bit late, but by this do you mean that the ideal hub
height for a disc for the rear of a 1600 is 60mm?
I'm trying to find an internal drum handbrake system that will fit the 1600
properly.
Cheers!
zac
----- Original Message -----
From: Terry Rudd <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, January 08, 2001 11:20 PM
Subject: RE: Brakes - Long
> Zac,
> The TRX Bluebird disc is 280mm (R31 is 260mm) but is not as good a choice
> for the rear of a 1600 as the hub height is 17mm greater for the TRX and
is
> compensated for with more inwards offset which makes them a real pain to
> clear the A arms and you can't use the original bracket on the 1600 as you
> can with the R31. The US guys use this disc with a made up bracket and
there
> is an article on the Bluebirds site. Before joining Ozdat I was nearly
> tempted to do this conversion myself but alas I was told about a better
way
> right here.
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Zac Campbell
> Sent: Monday, 8 January 2001 8:15
> To: [EMAIL PROTECTED]
> Subject: Re: Brakes - Long
>
>
> Nick, what is the size of the disc of the Bluebird rear disc with the
> internal handbrake?
> Could a larger disc be used?
>
> zac
>
> ----- Original Message -----
> From: Ken Abraham <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, January 07, 2001 9:31 PM
> Subject: Re: Brakes - Long
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
