Another way around it Adam is to make up some 500watt spotlight bars and
heating the paint with them. I have done this with some success and they
are easy to make, not to mention much cheaper than the ones you buy.
Shrinkage has been the enemy of painters since the dawn of time.
Regards
Brad HALLETT
http://www.datrats.com.au for all Datsun performance equipment!
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson
Sent: Monday, 5 February 2001 9:13
To: [EMAIL PROTECTED]
Subject: Re: paint question
Bruce,
I have had to put a pretty thick coat, so i will leave it for a few days
like you said.
Thankyou again for the help, very much appreciated
Cheers
Adam
----- Original Message -----
From: "Bruce Ferguson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 05, 2001 9:39 PM
Subject: Re: paint question
> Adam,
>
> If you have only applied a very thin coat and it is
> warm, you might get away with it.
>
> To be frank, I would prefer to leave it at least 3
> days minimum, you dont want shrinkage under your paint
> job as you will spit chips if you have to do it all
> over again !!!!!!!
>
> Cheers
>
> Bruce
>
> __________________________________________________
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
