I forgot what size cable I used but it was pretty thick! Just ran the
positive from the starter motor next to the fuel line through wrap around
insulation(plastic stuff) AS WELL AS corrigated conduit to make sure nothing
can rub through and cause short circuits. The negative was just then fixed
to the body in a spot where there was plenty of metal to stop voltage loss
in the boot.
Daniel Kroehn
Recommending Datrats, supplying quality Datsun performance parts
www.Datrats.com.au
----- Original Message -----
From: Justin Friedrichs <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 31, 2001 8:56 AM
Subject: BATTERY IN BOOT
>
>
> HI LISTERS,
> I'm about to put a battery in the boot, does anyone know the min
> thickness for the cable to minimise voltage drop.
> Also how long will it need to be?
> Where abouts in the firewall does the cable go? Maybe through that
> loom hole near the accelerator rod?
> I was thinking of putting the cable under the back seat, then right
> behind the drivers seat and follow the cable as far right as possible
> through the firewall. Sound OK?
>
> Thanks
> Fellas
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
